.. so that KMSDRM_CreateDevice() can fail and SDL_VideoInit() would
move on to next bootstrap member which is kmsdrm_legacy. hopefully
fixes bug #5393.
Specifically this patch which does not invoke _AC_PATH_X_XMKMF and
_AC_PATH_X_DIRECT internal autoconf routines when cross-compiling:
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f
Without this, CFLAGS would brokenly have system include paths like
-I/usr/include/X11 when cross-compiling e.g. for windows. (And it
also resulted in annoying imake crashes for my setup...)
Substring
I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get:
DEBUG: check_modesetting: probing ?/dev/dri/card0?
DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6
DEBUG: check_modesetting: probing ?/dev/dri/card0?
DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6
DEBUG: KMSDRM_VideoInit()
DEBUG: Opening device /dev/dri/card0
DEBUG: Opened DRM FD (3)
DEBUG: no atomic modesetting support.
DEBUG: Video subsystem has not been initialized
INFO: Using SDL video driver: (null)
DEBUG: Video subsystem has not been initialized
After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working).
This is a major regression in the KMSDRM driver.
Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.
Stephen Broadfoot
I've tracked this down to the following changeset bb65ba8e039b
https://hg.libsdl.org/SDL/diff/bb65ba8e039b/Makefile.in
this changeset renames the rule `build` to `build/.created` but the rule `install-lib` still depends on the rule `build`
This affects users who are trying to install via homebrew who are installing via source and not by the bottle as this invokes `make install`
To be clear, the error I was hitting when running make install is
make: *** No rule to make target `build', needed by `install-lib'. Stop.
pj5085
I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell.
I note this result in particular, for an SNES Gamepad (min=0, max=255):
Joystick value 0 becomes -32768
Joystick value 127 becomes 0
Joystick value 255 becomes 32767
Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center.
Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly.
I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is.
So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.
configure output is practically unchanged. there are still lots of
AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate
the warnings, but that's for another time.
pj5085
It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with.
This line of code was already present:
printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat);
For my joystick this yeilds:
Values = { 0, -127, 127, 0, 15 }
Then this code calculates the coefficients:
In SDL1:
joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat;
joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat;
t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat);
if ( t != 0 ) {
joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t;
} else {
joystick->hwdata->abs_correct[i].coef[2] = 0;
}
In SDL2:
joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat;
joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat;
t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat);
if (t != 0) {
joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t;
} else {
joystick->hwdata->abs_correct[i].coef[2] = 0;
}
Neither calculates the correct coefficients for the code in the AxisCorrect function.
In SDL1:
if ( value > correct->coef[0] ) {
if ( value < correct->coef[1] ) {
return 0;
}
value -= correct->coef[1];
} else {
value -= correct->coef[0];
}
value *= correct->coef[2];
value >>= 14;
In SDL2:
value *= 2;
if (value > correct->coef[0]) {
if (value < correct->coef[1]) {
return 0;
}
value -= correct->coef[1];
} else {
value -= correct->coef[0];
}
In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range.
In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835.
I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them.
Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767.
I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered.
Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767.
I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.
Added a hint to control whether a separate thread should be used for joystick events.
This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.
- SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title
or message field to "" if either of them is NULL.
- SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to ""
if either of them is NULL for EMSCRIPTEN builds.
- SDL_bmessagebox.cc: add empty string check along with NULL check for
title and message fields.
- SDL_windowsmessagebox.c (AddDialogString): remove NULL string check
- SDL_windowsmessagebox.c (AddDialogControl): add empty string check
along with the NULL check.
- SDL_x11messagebox.c: revert commit 677c4cd68069
- SDL_os2messagebox.c: revert commit 2c2a489d76e7
- test/testmessage.c: Add NULL title and NULL message tests.
Joel Linn
TLDR; https://godbolt.org/z/43fd8G
Let's deduce this from C++ reference code:
https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160
At the bottom of the page there is this snippet:
```
int wmain()
{
/* ... more code ... */
// Get the domain part of the URI.
HString domainName;
hr = uri->get_Domain(domainName.GetAddressOf());
if (FAILED(hr))
{
return PrintError(__LINE__, hr);
}
// Print the domain name and return.
wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr));
// All smart pointers and RAII objects go out of scope here.
}
```
`HString` is defined in `corewrappers.h` and the call chain for the destructor is:
`~HString() -> Release() -> ::WindowsDeleteString()`
QED
Sven-Hendrik Haase
In CMake I currently have trouble activating hidapi support as libusb-1.0 isn't ever correctly detected as it's searched for by the wrong name.
configure.ac correctly does this:
PKG_CHECK_MODULES([LIBUSB], [libusb-1.0], have_libusb=yes, have_libusb=no)
However, sdlchecks.cmake does this:
pkg_check_modules(LIBUSB libusb)
but it needs to be:
pkg_check_modules(LIBUSB libusb-1.0)
Vincent Hamm
Xcode11 and ios13 added support for metal simulator.
Here is a quick and dirty patch to enable it. Pretty early and only tested on a few samples for now. Required mostly to enable metal support on correct version of ios, generate simulator compatible shaders and enforce buffer alignments on simulator (same as osx).
Sebastian Vargas Vargas
Running CMake configure from a Windows Subsystem for Linux using Visual Studio Code Remote doesn't generate the header file with the current source revision, it throws "/home/sebva/SDL/build-scripts/updaterev.sh: 13: cannot create /mnt/c/Users/sebva/.vscode/extensions/ms-vscode-remote.remote-wsl-0.44.4/include/SDL_revision.h.new: Directory nonexistent".
If we fail to connect to the the pa server, we have an assigned context
and mainloop that isn't connected. So, when PULSEAUDIO_pa_context_disconnect
is called, pa asserts and crashes the application.
Assertion 'pa_atomic_load(&(c)->_ref) >= 1' failed at pulse/context.c:1055, function pa_context_disconnect(). Aborting.
Joel Linn
Eliminate additional heap allocation for short-lived HSTRINGs.
Uses `WindowsCreateStringReference()` to disable reference counting and memory management by the Window Runtime.
Tom Seddon
2nd time lucky, perhaps. patch 2 applies to current HEAD at time of writing - 4eb049c9bb1ca94efe3c40b57beda3169984d0cb from https://github.com/SDL-mirror/SDL.
This basically goes back to what was there originally, but now manually adding "-x objective-c" to the clang command line rather than "-ObjC". clang is then invoked without the "-x c" that was causing the problem, the snippet builds, and Metal is detected. (I had a quick trawl through the cmake code, but I couldn't see where this is handled.)
I was moved to try this after finding SDL's own CHECK_OBJC_SOURCE_COMPILES macro, and noting what it does: https://github.com/SDL-mirror/SDL/blob/4eb049c9bb1ca94efe3c40b57beda3169984d0cb/cmake/macros.cmake#L67
An alternative fix of course would be to use CHECK_OBJC_SOURCE_COMPILES instead of cmake's check_objc_source_compiles - but that had the same problem of getting confused by "return 0;". (Maybe that's because it's a macro? I'll defer to a cmake expert on this one.)
I decided in the end to err on the side of leaving things looking basically the same as they were before my first patch.
Ivan Mogilko
With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work.
I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside.
For the reference, following code is enough to reproduce the issue:
#include <windows.h>
#include <SDL.h>
int WinMain(
HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpCmdLine,
int nShowCmd)
{
SDL_Init(SDL_INIT_VIDEO);
SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0);
bool grabbed = false;
bool want_quit = false;
while (!want_quit)
{
SDL_Event event;
while (SDL_PollEvent(&event))
{
switch (event.type)
{
case SDL_QUIT: want_quit = true; break;
case SDL_KEYDOWN:
if (event.key.keysym.scancode == SDL_SCANCODE_SPACE)
{
SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed));
grabbed = !grabbed;
}
}
}
}
SDL_DestroyWindow(w);
SDL_Quit();
return 0;
}
Mathieu Eyraud
SDL dynamically loads libusb but does not check the return value of 'SDL_LoadFunction'.
Also libusb is loaded and initialized several time because 'SDL_hidapi_wasinit' is never set to true.
I made a patch if you want to test:
- check that 'hid_init' is called once and only once,
- check return value of 'hid_init',
- check return value of 'SDL_LoadFunction',
- check return value of 'SDL_malloc',
- add some debug logging.
On older mac, where METAL Renderer METAL fails to create, it allows to switch back to OpenGL SDL_Renderer
by re-creating the window (METAL flags was previously persistent).
This can happen if the application has not yet processed SDL_JOYDEVICEADD when
the same joystick is removed. It may also happen if two joysticks are added
and the second joystick is removed before the first joystick's SDL_JOYDEVICEADD
has been processed by the application.
Dominik Reichardt
Trying to integrate the latest SDL2 changes into our iOS project of Exult I've stumbled over the fact that when I added the static iOS library the public header files were copied to the archive of our project when you let Xcode build the archive.
This makes the archive invalid for upload to the AppStore Connect.
To fix this you need to delete the public headers from the build phase:
Open the xcode project, select the target "Static Library-ios", got to build phases, and in "headers" delete all the headers in the "public" group. This is safe to do as this actually just copies the public headers for some odd counterintuitive reason.
I think this needs to be done for all the library build targets but likely not for the framework targets.
Tom Seddon
This is as of commit 50d804ea729accf9e3a9ce83238d0a2976a17545 from https://github.com/SDL-mirror/SDL, which is HEAD as I write (apologies, not confident with Mercurial)
# Config
macOS: 10.14.6 (18G6042)
cmake --version: cmake version 3.16.20200101-g23e782c
clang --version: Apple clang version 11.0.0 (clang-1100.0.33.17)
Xcode version: Version 11.3.1 (11C504)
# Repro steps
Run the following commands in the shell.
cd /tmp/
git clone https://github.com/SDL-mirror/SDL
mkdir build.SDL
cd build.SDL
cmake -G ../SDL/
Examine cmake output.
# Expected result
Metal is detected.
# Actual result
It appears that Metal is not detected! Note this line in the summary:
-- RENDER_METAL (Wanted: 0): OFF
# Fix
Change check_c_source_compiles to check_objc_source_compiles. The cmake script tries to add -ObjC to the clang command line, but, for whatever reason, this doesn't seem to work.
Change the test source to have an empty main. The "return 0;" line seems to confuse cmake somehow, causing it to crap out with an error about HAVE_FRAMEWORK_METAL being an unknown argument. (Maybe I'm just dense, but it's not obvious to me what the problem is here.)
With these two changes:
-- RENDER_METAL (Wanted: ON): ON
Patch attached.
Dominik Reichardt
When you unified the Xcode project file you forgot to add the iOS file (/src/misc/ios/SDL_sysurl.m) to the project file, so the dummy in that folder takes over and the call does not work.
Relevant commits:
http://hg.libsdl.org/SDL/rev/c86bbf75f55e (SDL_OpenUrl enabled for macOS/iOS)
http://hg.libsdl.org/SDL/rev/282c3dc1cf65 (and following: unified Xcode project files)
Adding an ios group in the misc group of the project file and then adding /src/misc/ios/SDL_sysurl.m to it fixes the problem.
Joel Linn
Currently the rawinput driver always reports a device as "wired". This changes that to "unknown" and updates it once the device is correlated with xinput.
Most of the raw input events are dispatched in the main windows message loop. We only dispatch device change messages separately when we need them to be completely up to date.
It's legitimate to have a surface with 0 width or height (null 'pixels' pointer).
But calling SDL_FillRects would wrongly set the error "You must lock the surface".
src/joystick/windows/SDL_rawinputjoystick.c: In function 'RAWINPUT_HandleStatePacket':
src/joystick/windows/SDL_rawinputjoystick.c:1343:9: warning: suggest explicit braces to avoid ambiguous 'else'
multiply gyro values by sensitivity
When the hardware calibration fails, values read from sensors need to be multiplied by default sensitivity (16 for gyro, 1 for accelerometer).
Simon McVittie
When watching for hotplug events we can poll the inotify fd, but we
still need to scan /dev/input once per process, otherwise we'll fail
to detect devices that were already connected.
Alex S
Evdev headers aren't actually included in the base system (well, it has a private copy), they are available through the devel/evdev-proto port instead. We also have devel/libinotify and devel/libudev-devd shims, I didn't verify whether they work with SDL.
C.W. Betts
As it is, SDL2's built-in config on macOS for Metal excludes Apple Silicon. This is due to thinking that the 64-bit Mac platform would always be x86_64. My patch fixes this by using the catch-all of 64-bit platforms.
This fixes bad report parsing for various newer Xbox controllers, and this driver is now preferred over XInput, since it handles more than 4 controllers.
C.W. Betts
This patch adds support to the GameController framework on macOS Big Sur and later, adding support for MFi controllers as well as rumble support for PS4 and Xbox One. There is some code to make sure that the IOKit joystick handler doesn't include two controllers at once.
While the GameController framework is present in earlier versions of macOS, there was no public, approved way of checking if a specific IOHIDDevice is a controller that GameController could handle. This was changed in Big Sur.
Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers
Also fixed an issue with the accelerometer on iOS having inverted axes
In recent versions of EGL headers on Linux, the MESA_EGL_NO_X11_HEADERS macro is
deprecated and has been replaced with EGL_NO_X11. As a result, the configure
script would fail the compilation check for EGL headers and disable EGL (and by
extension, Wayland) support when X11 headers are not installed. Fix this by
adding the correct macro to disable X11 support in the headers.
The configure/cmake scripts were checking for these functions but we didn't
have the SDL_config.h.* pieces in place. The other config headers are best
guesses.
As the name suggests, the hint should only apply to SDL_THREAD_PRIORITY_TIME_CRITICAL
The resulting priorities for my current distro result in these values:
| High | Time Critical
Hint |--------------|-----------------
0 | P=10 N=-10 | P=5 N=-15
1 | P=10 N=-10 | P=-21 N=0
Building on FreeBSD fails:
/buildbot/worker/SDL/sdl-freebsd-amd64/src/src/joystick/linux/SDL_sysjoystick.c:26:2: error: SDL now requires a Linux 2.4+ kernel with /dev/input/event support.
#error SDL now requires a Linux 2.4+ kernel with /dev/input/event support.
^
/buildbot/worker/SDL/sdl-freebsd-amd64/src/src/joystick/linux/SDL_sysjoystick.c:35:10: fatal error: 'sys/inotify.h' file not found
#include <sys/inotify.h>
^~~~~~~~~~~~~~~
Spooky
For some reason the Logitech Extreme 3D joystick was added to SDL_gamecontrollerdb.h in the linux section only.
This breaks the joystick in linux as it is not a gamepad. I am unable to correctly use or map the Logitech Exteme 3D joystick in games that use SDL2 in linux.
Please remove Logitech Extreme 3D from SDL_gamecontrollerdb.h Linux section. It is a joystick not a gamepad.
Bart van der Werf
When directinput fails to load, but a controlller is plugged in, an access violation happens.
This is due to IEventHandler_CRawGameControllerVtbl_InvokeAdded calling SDL_DINPUT_JoystickPresent which does not check if dinput is assigned signalling initialization of directinput.
Joel Linn
This fixes two types of MSVC compiler warnings.
- One parameter in the function signatures of two WGI event handlers had one level of indirection too much (and did not match Windows SDK headers). The indirection was cast away so it still worked.
- size_t was implicitly cast to UINT32 for a number of (constant) string lengths.
wahil1976
This patch adds the KBIO text input driver for FreeBSD, which allows text input to fully work without text spilling out into the console. It also supports accented input, AltGr keys and Alt Lock combinations.
Tested with US accent keys layout and various AltGr layouts.
Alex S
...which allows SDL to talk to webcamd/iichid. (Webcamd actually bundles quite a few gamepad drivers.) Note that this does _not_ disable usbhid, both joystick backends will be compiled.
This uses pre-recorded evdev capabilities, so that we can check for
regressions without the devices having to be physically present.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This improves SDL's ability to detect joystick hotplug in a container
environment.
We cannot reliably receive events from udev in a container, because they
are delivered as netlink events, which are authenticated by their uid
being 0. However, in a user namespace created by an unprivileged user
(for example bubblewrap, as used by Flatpak and Steam's
pressure-vessel-wrap), the kernel does not allow us to map uid 0, and
the netlink events appear to be from the kernel's overflowuid (typically
65534/nobody), meaning libudev cannot distinguish between genuine uevents
from udevd and an attack by a malicious local user.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Anything with X, Y and Z axes but no buttons is probably an
accelerometer (this is the assumption made in udev).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously we only checked for at least one button or key and at least
the X and Y absolute axes, but this has both false positives and false
negatives.
Graphics tablets, trackpads and touchscreens all have buttons and
absolute X and Y axes, but we don't want to detect those as joysticks.
On normal Linux systems ordinary users do not have access to these
device nodes, but members of the 'input' group do.
Conversely, some game controllers only have digital buttons and no
analogue axes (the Nintendo Wiimote is an example), and some have axes
and no buttons (steering wheels or flight simulator rudders might not
have buttons).
Use the more elaborate heuristic factored out from SDL's udev code path
to handle these cases.
In an ideal world we could use exactly the same heuristic as udev's
input_id builtin, but that isn't under a suitable license for inclusion
in SDL, so we have to use a parallel implementation of something
vaguely similar.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This works on capability bitfields that can either come from udev or
from ioctls, so it is equally applicable to both udev and non-udev
input device detection.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Device enumeration via libudev can fail in a container for two reasons:
* the netlink protocol between udevd and libudev is considered private,
so there is no API guarantee that the version of libudev in a container
will understand netlink messages from a dissimilar version of udevd
on the host system;
* the netlink protocol between udevd and libudev relies for security on
being able to check the uid of each message, but in a container with
a user namespace where host uid 0 is not mapped, the libudev client
cannot distinguish between messages from host uid 0 and messages from
a different, malicious user on the host
To make this easier to experiment with, always compile the fallback
code path even if libudev is disabled. libudev remains the default if
enabled at compile time, but the fallback code path can be forced.
Signed-off-by: Simon McVittie <smcv@collabora.com>
GetAsyncKeyState() and GetRawInputData() report the state of the physical
buttons without applying the user's primary/secondary mouse button swap
preference. Swap the buttons returned from these functions, so we expose a
consistent view of the buttons to SDL callers. This new behavior also matches
the behavior of macOS and X11 backends.
See the Remarks section of the GetAsyncKeyState() function on MSDN.
We should only perform the VK_LEFT, VK_UP, etc. mapping if none of the other
special mappings apply. This allows the scancode normalization for the number
pad to take place as intended.
When we request realtime priority from rtkit, we have a rttime limit. If we exceed
that limit, the kernel will send SIGKILL to the process to terminate it.
This isn't something that most high priority processes will want, only processes
that selectively opt into SCHED_RR/FIFO through SDL_HINT_THREAD_PRIORITY_POLICY
should be subject to this level of scrutiny.
This change:
* Switches non-apple posix OSs to use SCHED_OTHER instead of SCHED_RR
for SDL_THREAD_PRIORITY_HIGH/SDL_THREAD_PRIORITY_TIME_CRITICAL.
* Fixes using a hardcoded RLIMIT_RTTIME, instead queries it from rtkit
* Only sets RLIMIT_RTTIME for MakeRealtime rtkit requests
* Adds a note regarding the possible SIGKILL with SDL_HINT_THREAD_PRIORITY_POLICY
* Introduces SDL_HINT_THREAD_FORCE_REALTIME_TIME_CRITICAL to allow apps to acquire realtime scheduling policies on Linux
CPU Vendor ID "Shanghai" and "CentaurHauls" belongs to Zhaoxin.
Background:
Shanghai Zhaoxin Semiconductor Co., Ltd ("Zhaoxin") , established in 2013,
headquartered in Zhangjiang, Shanghai, China. Zhaoxin aims at providing
general-purpose x86 processors.
Related Zhaoxin Linux Kernel patch can be found at
https://lore.kernel.org/lkml/01042674b2f741b2aed1f797359bdffb@zhaoxin.com
Best regards.
Debugging inside rtkit showed we were failing the RLIMIT_RTTIME check, now that we're asking for realtime and not just high-priority due to a change in SDL.
Between that and the DBus code in SDL being wrong in previous changelist I'm not sure how this could have ever worked.
Nov 02 20:34:15 redcore rtkit-daemon[2825]: Failed to parse MakeThreadRealtime() method call: Argument 1 is specified to be of type "uint32", but is actually of type "int32"
Nov 02 20:34:15 redcore rtkit-daemon[2825]: Failed to parse MakeThreadRealtime() method call: Argument 1 is specified to be of type "uint32", but is actually of type "int32"
Docs:
http://git.0pointer.net/rtkit.git/tree/README
CLIENTS:
To be able to make use of realtime scheduling clients may
request so with a small D-Bus interface that is accessible on
the interface org.freedesktop.RealtimeKit1 as object
/org/freedesktop/RealtimeKit1 on the service
org.freedesktop.RealtimeKit1:
void MakeThreadRealtime(u64 thread_id, u32 priority);
void MakeThreadHighPriority(u64 thread_id, s32 priority);
Joel Linn
This patch fixes a MSVC warning, which is dependent on the regional settings of the build system. Although the character is inside a comment and harmless, it is undesirable to disable the warning for this.
OpenGL leaves the final line segment open, SDL's software renderer does not,
so we need a tiny bit of trigonometry here to move one more pixel in the right
direction.
Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
This allows one to build Raspberry Pi versions on an ancient version of
Raspbian and get both the KMSDRM and RPI video targets built into SDL, giving
maximum binary compatibility from linking against an older glibc, etc, but
also making one library that can access video on all RPi models and OS
releases.
batyastudios
Basicly there is problem and somewhat a solution: https://discourse.libsdl.org/t/setwindowmaximumsize-bug/28267
If you SDL_SetWindowMaximumSize() after SDL_SetWindowMinimumSize() with one of axes have the same value, function will have no effect.
This: (line 2144@SDL_video.c)
if (max_w <= window->min_w || max_h <= window->min_h) {
SDL_SetError("SDL_SetWindowMaximumSize(): Tried to set maximum size smaller than minimum size");
return;
}
May be changed to this:
if (max_w < window->min_w || max_h < window->min_h) {
SDL_SetError("SDL_SetWindowMaximumSize(): Tried to set maximum size smaller than minimum size");
return;
}
When converting audio from signed to unsigned values of vice-versa
the silence value chosen by SDL was the value of the device, not
of the stream that the data was being put into. After conversion
this would lead to a very high or low value, making the speaker
jump to a extreme positon, leading to an audible noise whenever
creating, destroying or playing scilence on a device that reqired
such conversion.
UnmapNotify event does not mean that window has been iconified. It
just reports that window changed state from mapped to unmapped.
XReparentWindow can unmap and remap window if it was mapped. This
causes unnecessary events - HIDDEN, MINIMIZED, RESTORED and SHOW.
These events are problematic with Metacity 3.36+ which started to
remove window decorations from fullscreen windows.
- SDL makes decorated window fullscreen
- Metacity removes decorations
- SDL gets UnmapNotify and exits from fullscreen
- Metacity re-adds decorations
As SDL will also get MapNotify event it will try to restore
window state causing above steps to repeat.
https://bugzilla.libsdl.org/show_bug.cgi?id=5314
Add a minimal my_gradd.h containing structures and constants only used
by SDL_os2vman.c -- based on public knowledge from around the internet
including pages from http://www.osfree.org and http://www.edm2.com .
Original code assigned MCIMixSetup.ulSamplesPerSec value to it, but it
is just the freq... We now change spec->samples only either if it is 0
or we changed the frequency, by picking a default of ~46 ms at desired
frequency (code taken from SDL_audio.c:prepare_audiospec()).
With this, the crashes I have been experiencing are gone.
- video: VideoBootStrap->available() is gone.
- thread: all important SDL_CreateThread internal data now put into
struct SDL_Thread: changes to SDL_SYS_CreateThread().
- events / video: SDL_SetDoubleClickTime() removed -- functionality
moved to SDL_mouse.c:SDL_MouseDoubleClickTimeChanged().
- video: struct SDL_VideoDevice-> CreateWindow and CreateWindowFrom
members renamed to CreateSDLWindow and CreateSDLWindowFrom
Has been happening with testfilesystem from 2.0.6 and newer because
of commit 572a721879ef.
Also set error strings in certain error conditions.
Also applied coding style / whitespace fixes, while I was there.
- Displays may have been added, removed or changed and all cached monitor
handles are invalidated as a result.
- Display events are handled in three steps:
1. Mark all currently know displays as invalid
2. Enumerate all displays, adding new ones and marking known displays as valid
3. Remove all displays still invalid after enumeration
- Display connect/disconnect events are sent when displays are added or removed
after initial setup
- SDL_config.h.in: add missing defines SDL_SENSOR_COREMOTION
and SDL_SENSOR_WINDOWS (configure did set SDL_SENSOR_WINDOWS
but it never went in SDL_config.h or Makefile.)
- SDL_config.h.cmake: remove duplicated SDL_SENSOR_XXX cmake
defines.
- autofoo, cmake: check for sensorsapi.h header before enabling
windows sensors.
(Also see: https://bugzilla.libsdl.org/show_bug.cgi?id=4822)
Building the current tree against 10.8 SDK, clang emits the following warning:
src/video/cocoa/SDL_cocoawindow.m:1846:27: warning: instance method '-isOperatingSystemAtLeastVersion:' not found (return type defaults to 'id') [-Wobjc-method-access]
![processInfo isOperatingSystemAtLeastVersion:version]) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/opt/MacOSX10.8.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSProcessInfo.h:20:12: note: receiver is instance of class declared here
@interface NSProcessInfo : NSObject {
^
1 warning generated.
isOperatingSystemAtLeastVersion is an 10.10 thing.
loadNibNamed:owner:topLevelObjects is available on 10.8 and newer.
There is an issue report here about an app failing to function on
10.7 and earlier: https://discourse.libsdl.org/t/28179
I _think_ this is a right thing to do; it fixes a .wav file I have here that
has blockalign==2 when channels==2 and bitspersample==16, which otherwise
would fail.
This could fix a rare crash if:
- onConfigurationChanged is called before onCreate();
or
shared libraries failed to load and onConfigurationChanged() is called
Add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE_PAUSEAUDIO not to pause audio when
the app goes to background.
(It requires SDL_ANDROID_BLOCK_ON_PAUSE as "Non blocking")
SDL_cocoametalview was consuming the first click rather than passing it
through to the SDLView underneath which overrides [NSView acceptsFirstMouse]
based on the user's SDL_HINT_MOUSE_FOCUS_CLICKTHROUGH preference.
that are mapped to it and automatically invalidate them when it is freed
- refcount is kept so that an external application can still create a reference
to SDL_Surface.
- lock_data was un-used and is now renamed and used as a list keep track of the blitmap
"In the second half of 2021, new apps will be required to publish with the Android App Bundle on Google Play"
(see https://developer.android.com/guide/app-bundle)
And "Android App Bundles don't support APK expansion (*.obb) files".
Rainer Deyke
While most of the KMOD_* flags are enums, the combination flags KMOD_CTRL, KMOD_ALT, KMOD_SHIFT and KMOD_GUI are defined as macros. This breaks third-party code that uses these KMOD_* names for local identifiers, such as OGRE. The correct thing to do is to make them all enums.
It is a protocol error to attempt to create a pointer confine (i.e.
`SDL_SetWindowGrab`) while a locked pointer is active, and vice-versa.
Instead of aborting due to a protocol error, this commit makes SDL
gracefully downgrade locked pointers to confines when appropriate.
We now handle HiDPI correctly, and touches are clamped to the viewport. So
if you are rendering to a logical 640x480 in a 720p window, and touch the
letterboxing at point (640,700), it will report the touch at (0.5,1.0) instead
of outside the documented range.
Previously the first card with non-empty connectors, encoders
and crtcs would be selected, however KMSDRM_VideoInit could still reject
it if the connector was not connected. This allow finding the first card
(in a multi GPU setup) that is actually connected to a display.
Manuel Alfayate Corchete
I noticed pt2-clone had problems with it's optional hardware mouse on the KMSDRM backend: cursor had a transparent block around it.
So I was investigating and it seems that a GBM cursor needs it's pixels to be alpha-premultiplied instead of straight-alpha.
A
lso, I was previously relying on "manual testing" for the cursor size, but it's far better to use whatever the DRM driver recommends via drmGetCap(): any working driver should make a size recommendation via drmGetCap(), so that's what we use now. I took this decision because I found out that the AMDGPU driver reported working cursor sizes that would appear garbled on screen, and only the recommended cursor size works.
This fixes a case where you render to the backbuffer, then render to a render
target, set the current target back to the backbuffer, and then present
without drawing anything else; in this circumstance, the Present command
would never happen.
Fixes Bugzilla #5011.
This is handled in in the higher-level SDL_GL_LoadLibrary().
All uses of SDL_EGL_LoadLibrary (which calls the Only version) are just
target-specific wrappers for their own GL_LoadLibrary hook, with two
exceptions which now handle driver_loaded correctly (although it's
questionable if these init-if-no-one-did-it-correctly-already code blocks
should exist at all, fwiw).
Fixes Bugzilla #5190.
jackmacwindowslinux
I'm testing my application that uses SDL2 on the new Apple Silicon Macs. I set up the SDL 2.0.12 source code from the website and tried to build it. The first issue I ran into was that it was always building OpenGL ES, even if --disable-video-opengles was passed to configure. OpenGL ES headers do not seem to be present on the Apple Silicon macOS SDK, except for the iOS SDK headers. Then I had problems with the joystick driver, where some classes used on iOS were not available on macOS.
After looking through the configure.ac script a bit, I found that iOS targets are selected when the build host matches "arm*-apple-darwin*". Clang on macOS 11.0 on arm64 reports the host as "arm64-apple-darwin20.0.0", which matches the iOS target. This means that ARM Mac compilation will always be detected as iOS. Unfortunately, there doesn't seem to be an easy way to detect Mac vs. iOS targets, since they now both use the same triplet & compiler for building.
I'm not sure what the best way to fix this is, but maybe there could be an additional target flag to specify whether to build for macOS or iOS? This might break compatibility, though: with this approach, either all old scripts that used configure to build for iOS fail, or all new builds on macOS without a flag fail (silently?).
Instead of creating an X11 connection to test that X11 is available,
closing the connection, and then reconnecting for real, use the same
connection to handle both cases.
The X11 connection retry delay mechanism in the case where X11 is
dynamically loaded has been removed. It was only necessary to avoid
authetnication token reuse from the XOpenDisplay call that used to
exist in X11_Available. Now that this call is only made once, it
is no longer needed.
Also drop unused and inapplicable code from a comment.
***
The two are only ever called together, and combining them makes it possible
to eliminate redundant symbol loading and redundant attempts to connect
to a display server.
For systems without strlcpy and strlcat, just declare them as if they exist;
the analyzer possibly still knows the details of these functions and can
utilize that in its analysis.
Most of this patch was from meyraud705 at gmail and Martin Gerhardy. Thanks!
Fixes Bugzilla #5163.
Apparently the "-x objective-c" made it down to the linker, who then treats
the .o file as Objective-C source code. Apparently the -ObjC argument does
the same thing but gets ignored by the linker.
Fixes Bugzilla #4988.
Manuel Alfayate Corchete
This small patch fixes the KMSDRM_CreateSurfaces() call in KMSDRM_CreateWindow(), that was segfaulting deeper into SDL internals because the windata->viddata pointer wasn't set before the KMSDRM_CreateSurfaces() call.
So that's what this small patch does.
Now, L?VE2D works perfectly well on the Raspberry Pi 3, instead of just segfaulting.
Ellie
I just tripped over this: stb_image when requesting 3 channels with 8-bit actually returns them as 3 bytes per pixel with no alignment, so basically 4 pixels are 12 bytes with no padding (0...2, 3...5, 6...8, and 9...11). This I would have naively expected to be called RGB888 or BGR888, since there is no "dead" unused byte as I would expect for something called e.g. RGBX8888.
However, SDL2's SDL_PIXELFORMAT_BGR888 uses 4 bytes, same as SDL_PIXELFORMAT_BGRX8888, even though the latter appears to be a longer storage format - which it isn't, internally. It's just swapped, in byte order X, B, G, R (instead of BGRX). So why isn't the macro name also swapped, as "XBGR888" instead of just "BGR888"?
I find the formats therefore named inconsistently, and unless there is a reason for this I suggest these changes:
1. deprecate SDL_PIXELFORMAT_BGR888 in favor of a new SDL_PIXELFORMAT_XBGR8888
and
2. deprecate SDL_PIXELFORMAT_RGB888 in favor of a new SDL_PIXELFORMAT_XRGB8888
JackBoosY
In src/video/winrt/SDL_winrtgamebar.cpp line 55:
virtual HRESULT STDMETHODCALLTYPE add_VisibilityChanged(
__FIEventHandler_1_IInspectable *handler,
Windows::Foundation::EventRegistrationToken *token) = 0;
The macro __FIEventHandler_1_IInspectable defined in windows.fondation.h(Windows10 SDK 10.0.17763.0) line 3576:
#define __FIVector_1_Windows__CFoundation__CPoint ABI::Windows::Foundation::Collections::__FIVector_1_Windows__CFoundation__CPoint_t
but no longer exists in Windows 10 SDK 10.0.19041.0.
After searching this macro in the sdk include path, I found that it was defined in many header files. But it should be replaced in windows.system.h .
On some systems, GetClipCursor() impacts performance when called frequently, so only call it every once in a while to make sure we haven't lost our capture.
Manuel Alfayate Corchete
I'm trying to build SDL2 with threads support here in GNU/Linux, both X86 and ARM, and it does not seem to be possible ATM:
/home/manuel/src/SDLLLL/src/core/linux/SDL_threadprio.c:233:26: error: 'rtkit_max_realtime_priority' undeclared (first use in this function)
Manuel Alfayate Corchete
This patch is needed so programs that do this work as expected:
1) Start in a different video mode than the mode used by the system and then...
2) Try to go fullscreen with the mode originally used by the system via SetWindowFullScreen() with the SDL_WINDOW_FULLSCREEN_DESKTOP flag.
An example would be pt2-clone in https://github.com/8bitbubsy/pt2-clone.
This program does this:
Starts with:
video.window = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED,
SDL_WINDOWPOS_CENTERED, screenW, screenH, windowFlags);
and then, *IF* the user has configured it in fullscreen mode in its .ini, it tries to go fullscreen with the desktop mode:
SDL_SetWindowFullscreen(video.window, SDL_WINDOW_FULLSCREEN_DESKTOP);
This sequence of operations is currently failing because SDL_SetDisplayModeForDisplay() in SDL_video.c fails because display->desktop_mode is not being initialized with its correct value: SetDisplayMode() in SDL_kmsdrmvideo.c will not be able to set the mode because it detects the mode to have a driverdata of 0x0 ("if (!modedata)") and rightfully returns an error.
So, the included patch fixes this small problem, and programs that first change the video mode and then try to go fullscreen with the system video mode will now work.
The patch simply fixes an small omission, but its really needed now that dynamic video mode changing was implemented on the KMSDRM backend.
Ryan C. Gordon
As discussed here:
https://discourse.libsdl.org/t/question-about-implementation-of-sdl-updatewindowsurfacerects/27561
"As you can see this function [WIN_UpdateWindowFramebuffer, in src/video/windows/SDL_windowsframebuffer.c] calls BitBlt on entire screen, even though it accepts the rects. Rects variable is not even used in this function at all. Now my question is why is that the case?"
Anthony Pesch
I was looking into my own input bug and noticed an issue in the HIDAPI code while looking over it. I don't have a controller that goes down this path to test and try to provoke the issue, but it looks pretty straight forward.
The memmove to shift the joystick id array on disconnect isn't scaling the size by sizeof(SDL_JoystickID), likely corrupting the ids on disconnect.
Giovanni Bajo
The CMake build system supports several audio frameworks for Linux: one of them is sndio.
All frameworks can be built with "runtime linking" (that is, using dlopen to load the library at runtime). In sdlchecks.cmake, there's code to do the same with sndio:
=================================================================
# Requires:
# - n/a
# Optional:
# - SNDIO_SHARED opt
# - HAVE_DLOPEN opt
macro(CheckSNDIO)
if(SNDIO)
# TODO: set include paths properly, so the sndio headers are found
check_include_file(sndio.h HAVE_SNDIO_H)
find_library(D_SNDIO_LIB sndio)
if(HAVE_SNDIO_H AND D_SNDIO_LIB)
set(HAVE_SNDIO TRUE)
file(GLOB SNDIO_SOURCES ${SDL2_SOURCE_DIR}/src/audio/sndio/*.c)
set(SOURCE_FILES ${SOURCE_FILES} ${SNDIO_SOURCES})
set(SDL_AUDIO_DRIVER_SNDIO 1)
if(SNDIO_SHARED)
if(NOT HAVE_DLOPEN)
message_warn("You must have SDL_LoadObject() support for dynamic sndio loading")
else()
FindLibraryAndSONAME("sndio")
set(SDL_AUDIO_DRIVER_SNDIO_DYNAMIC "\"${SNDIO_LIB_SONAME}\"")
set(HAVE_SNDIO_SHARED TRUE)
endif()
else()
list(APPEND EXTRA_LIBS ${D_SNDIO_LIB})
endif()
set(HAVE_SDL_AUDIO TRUE)
endif()
endif()
endmacro()
=================================================================
The feature is gated by an option called SNDIO_SHARED. It is also fully implemented in SDL_sndioaudio.c
Unfortunately, it seems there is a missing line in CMakeLists.txt, so SNDIO_SHARED is not defined:
======================================================================
set_option(ALSA "Support the ALSA audio API" ${UNIX_SYS})
dep_option(ALSA_SHARED "Dynamically load ALSA audio support" ON "ALSA" OFF)
set_option(JACK "Support the JACK audio API" ${UNIX_SYS})
dep_option(JACK_SHARED "Dynamically load JACK audio support" ON "JACK" OFF)
set_option(ESD "Support the Enlightened Sound Daemon" ${UNIX_SYS})
dep_option(ESD_SHARED "Dynamically load ESD audio support" ON "ESD" OFF)
set_option(PULSEAUDIO "Use PulseAudio" ${UNIX_SYS})
dep_option(PULSEAUDIO_SHARED "Dynamically load PulseAudio support" ON "PULSEAUDIO" OFF)
set_option(ARTS "Support the Analog Real Time Synthesizer" ${UNIX_SYS})
dep_option(ARTS_SHARED "Dynamically load aRts audio support" ON "ARTS" OFF)
set_option(NAS "Support the NAS audio API" ${UNIX_SYS})
set_option(NAS_SHARED "Dynamically load NAS audio API" ${UNIX_SYS})
set_option(SNDIO "Support the sndio audio API" ${UNIX_SYS})
set_option(FUSIONSOUND "Use FusionSound audio driver" OFF)
dep_option(FUSIONSOUND_SHARED "Dynamically load fusionsound audio support" ON "FUSIONSOUND" OFF)
======================================================================
You can see that all frameworks define a "dep_option" NAME_SHARED, and SNDIO is the only one where the option is missing.
This means that runtime loading of sndio is never activated. If sndio is found at configuration time, it is always activated in "linked" mode, so that the final binary will have a load-time dependency with libsdnio. This is unfortunate.
To fix the problem, it is sufficient to add this line:
dep_option(SNDIO_SHARED "Dynamically load the sndio audio API" ${UNIX_SYS} ON "SNDIO" OFF)
I've verified that this fixes the bug, and sndio can now be dynamically loaded as expected.
It currently behaves like a locking key which is pressed
when Caps Lock is enabled and released when disabled. This
means that apps that trigger events on Caps Lock key down will
only fire these events every other time Caps Lock is pressed.
Lacky
It looks like refactoring of SDL2 internal API has broken SDL_RenderFillRect for DirectFB. In new version function SDL_RenderFillRect returns 0, but rectangle is not visible.
Replacing "count" with "len" in the argument list for SDL_memcpy in DirectFB_QueueFillRects fixes problem.
Jan Bujak
I wrote a new driver for my gamepad on Linux. I'd like SDL to support it out-of-box, as currently it just treats it as a generic joystick instead of a gamepad. From what I can see the only way to do that is to either 1) pick one of the already supported controllers' PID, VID and button layouts and have my driver send that (effectively lying that it's something else), or 2) submit a preconfigured, hardcoded mapping to SDL.
Both of those, in my opinion, are silly when we already have the Linux Gamepad Specification which standarizes this:
https://www.kernel.org/doc/html/v4.15/input/gamepad.html
Unfortunately SDL doesn't make use of it currently. So I've took it upon myself to add it; patch is in the attachments.
Basically what the patch does is that if SDL finds no built-it controller mappings for a given joystick it then asks the joystick backend to autodetect it, and that uses the relevant evdev bits to figure out which button/axis is which. (See the specs for more details.)
With this patch applied my own driver for my controller works out-of-box with SDL with no extra configuration and is correctly recognized as a gamepad; this is also going to be the case for any other driver which follows the Linux Gamepad Specification.
Arithmatic operations promote Uint8 to signed int. If the top bit of a
Uint8 is set, and it is left shifted 24 places, then the result is not
representable in a signed 32 bit int. This would be undefined behaviour
on systems where int is 32 bits.
It makes it clearer who owns the memory, and more reasonable to free it on
failure in the creating function.
(and, of course, pacifies static analysis.)
Manuel Alfayate Corchete
On the KMSDRM backend, there is no such thing as a desktop, yet some programs could (and DO) use SDL_GetGlobalMouseState().
So I think its good idea that, in KMSDRM, it returns the same mouse coordinates anyway as SDL_GetMouseState() would return. There is nothing else it could return, as far as I can understand, since there is no desktop anyway.
This small patch does precisely that.
Manuel Alfayate Corchete
The KMSDRM backend was doing things wrong because of some small (but important) misconceptions on how KMS/DRM works: to implement a largely broken non-vsync refresh mechanism, the SwapWindow() function was issuing new pageflips before previous ones had completed, thus causing EBUSY returns, buffer mismanagement, etc... resulting in general breakage on vsync disabling from apps, that would not allow vsync to work again without KMSDRM video re-initialization.
To further clarify, on most DRM drivers async pageflips are NOT working nowadays, so all issued pageflips will complete on next VBLANK, NOT ASAP (calling drmModePageFlip() with the DRM_MODE_PAGE_FLIP_ASYNC flag will return error).
The old code was assuming that can just issue a synchronous (=on VBLANK) pageflip and then pass a 0 timeout to the pull() function so we do not wait for the pageflip event, thinking that this will lead to correct non-vsynced screen updates from the program: That is plain wrong.
Each pageflip has to be waite before issuing a new one, ALWAYS. And if we do not support ASYNC pageflips on the DRM driver level, then we are forced to wait for the next VBLANK. There is no way around it.
I have also added many comments on the KMSDRM code. This is needed for future reference for me or others who may need to look at this code: KMS/DRM terminology regarding what SYNC and ASYNC mean in pageflip terms, and where to do certain things and why, is not trivial. It is not desirable or possible to invest time on researching the same concepts every time there is need to dive into this code. So please leave all these comments in the patch.
1. Comment that SDL_SetThreadPriority will make any necessary system changes when applying priority.
2. Add a hint to override SDL's default behavior for scheduler policy.
3. Modify the pthreads SDL_SetThreadPriority so that instead of just using the current thread scheduler policy it will change it to a policy that should work best for the requested priority.
4. Add hint checks in SDL_SetThreadPriority so that #3 can be overridden if desired.
5. Modify the Linux SDL_SetThreadPriority so that in the case that policy, either by SDL defaults or from the hint, is a realtime policy it uses the realtime rtkit API.
6. Prior to calling rtkit on Linux make the necessary thread state changes that rtkit requires. Currently this is done every time as it isn't expected that SDL_SetThreadPriority will be called repeatedly for a thread.
The compiler understands it, but the "qcc" compiler driver doesn't, and the
standard Khronos headers upset QNX anyhow, since they try to include X11
headers in the __unix__ section.
If this is a problem, we can write a test for the compiler flag, but shouldn't
we _always_ use our Khronos headers instead of depending on the system...?
michaeljosephmaltese
Display ends up taking only 1/4 of the screen area. It needs to call "setWantsBestResolutionOpenGLSurface:highdpi", like when creating a window the normal way.
wengxt
Due to the new major fcitx version is coming close, the existing code need to be ported to use new Fcitx dbus interface.
The new dbus interface is supported by both fcitx 4 and 5, and has a good side effect, which is that it will work with flatpak for free. Also the patch remove the dependency on fcitx header. Instead, it just hardcodes a few enum value in the code so need to handle the different header for fcitx4 or 5.
meyraud705
'SDL_Windows::driverdata' of a Wayland window is allocated by calloc in 'Wayland_CreateWindow' but freed by SDL_free in 'Wayland_DestroyWindow'.
meyraud705
I see how the documentation is confusing. I think that the choice of the axis is an implementation detail. The documentation should state the goal of this value, so I propose this wording:
"Use this value to play an effect on the steering wheel axis. This provides
better compatibility across platforms and devices as SDL will guess the
correct axis."
Value could even be renamed 'SDL_HAPTIC_STEERING_AXIS'.
For Linux, sending an effect on the X axis with a Logitech wheel works. Others brands don't have driver for Linux as far as I know.
This is only supported on PulseAudio. You can set a description when opening
your audio device that will show up in pauvcontrol, which lets you set
per-stream volume levels.
Fixes Bugzilla #4801.
dark_sylinc
Trying to build SDL with VS2019 using CMake will encounter a linking error
More specifically:
1>SDL_string.obj : error LNK2019: unresolved external symbol memset referenced in function SDL_vsnprintf_REAL
* 8BitDo N30 Pro 2
* 8BitDo SN30 Gamepad
* 8BitDo SN30 Pro+
* 8BitDo Zero 2
* SZMY-POWER PC Gamepad
* ThrustMaster eSwap PRO Controller
* ZEROPLUS P4 Wired Gamepad
In additional, all 8BitDo controllers use SDL_HINT_GAMECONTROLLER_USE_BUTTON_LABELS to have the correct mapping based on user preferences.
This patch removes deferred error string formatting: now we do it during
SDL_SetError(), so there's no limit on printf-style arguments used.
Also removes stub for managing error string translations; we don't have the
facilities to maintain that and the way we set arbitrary error strings
doesn't really make this practical anyhow.
Since the final error string is set right away and unique to the thread,
we no longer need a static buffer for legacy SDL_GetError(), and we don't
have to allocate 5x 128-byte argument fields per-thread. Also, since we now
use SDL_vsnprintf instead of parsing the format string ourselves, there's a
lot of code deleted and we have access to more robust formatting powers now.
This does mean the final error strings can't be more than 128 bytes, down
from the theoretical maximum of around 768, but I think this is probably okay.
They might truncate but they will always be null-terminated!
Fixes Bugzilla #5092.
The joystick layer can't necessarily give us perfect centering, but we know
that the game controller level has logical absolute idle positions that have
nothing to do with the physical device.
So send game controller events to make it look like the device is completely
untouched before sending the final removal event.
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
meyraud705
On line 220 of SDL_hidapi_xbox360.c https://hg.libsdl.org/SDL/file/4608f0e6e8e3/src/joystick/hidapi/SDL_hidapi_xbox360.c#l220
if (!XINPUTGETSTATE(user_index, &xinput_state[user_index].state) == ERROR_SUCCESS) {
logical not is only applied to the left hand side of this comparison.
I think you mean:
if (XINPUTGETSTATE(user_index, &xinput_state[user_index].state) != ERROR_SUCCESS) {
Caleb Cornett
Just ran into this, and from my testing, whatever re-added the dependency is a _major_ regression. Not only is your app forced to link with CoreBluetooth, but iOS has apparently tightened up security and won't even let you _test_ your app unless it specifies the NSBluetoothAlwaysUsageDescription in an Info.plist. It doesn't even pop up an error message, it just straight up crashes.
Adding the permission isn't a good solution either, since I'd really, really rather not have my app request users' bluetooth to always be enabled, especially if the only apparent reason is for Steam Controller support.
On Raspberry Pi 3 via the VC4 driver in firmware KMS mode, none of the
found configs match the desired format, causing the function to fall through
without any config being selected.
Fix by first iterating over the found configs, and if no match exists,
don't exclude the non-matching configs. This should fix RPI3 and possibly other
targets without breaking targets that have a matching native format (such as RPI4).
This allows you to bind surfaceless contexts on a background thread to, for
example, load assets in a separate context, for platforms that have different
requirements about sharing surfaces, etc.
Martin's notes on the matter:
"Here's a patch that enables passing NULL windows to SDL_GL_MakeCurrent, if
the involved APIs allow it. Currently, this is only the case for EGL, and
even then only if some specific extensions are present (which they usually
are).
If "surfaceless" contexts are not supported, SDL_GL_MakeCurrent continues to
generate an error (albeit with a more specific error message than it used to),
so this should not break anything that wasn't broken before."
(Please see https://bugzilla.libsdl.org/show_bug.cgi?id=3695 for more
discussion.)
Fixes Bugzilla #3695.
This behavior matches SDL_RecreateWindow and makes it less likely that
another piece of code (e.g. a DestroyWindowFramebuffer implementation)
will attempt to use or free the stale surface pointer.
A project being built entirely statically will call pkg-config with
--static, which utilises the Libs.private field. Conversely it will
not use --static when not being built entirely statically, even if
there is only a static build of SDL available. This will most likely
cause the build to fail due to underlinking unless we merge the Libs
fields.
This is what the Meson build system does when it generates pkg-config
files. This also also follows the behaviour of sdl2-config.
At the same time, the runtime linker flags are not applicable to
static-only builds so only add them for shared builds.
From hmk:
"When scaling is enabled (e.g. via SDL_RenderSetLogicalSize, size not equal
to window size), mouse motion events are also scaled. Small motions are
rounded up (SDL_max() when the value after scaling is less than 1), while
larger motions are truncated by the floating point -> integer conversion.
https://hg.libsdl.org/SDL/file/b18197f9bf9d/src/render/SDL_render.c#l658
The end result feels something like mouse reverse mouse acceleration + angle
snapping at low speeds, but less consistent (amount of truncation & rounding
depends on how fast the mouse is moved) and potentially much worse if the
scaling factor is large. This pretty much makes it useless for anything
where you need precise mouse aiming (think of games). I suspect this is why
aiming gets so terrible in some games that let you use scaling to reduce the
render resolution (e.g. Ion Fury).
With 4x4 scaling, I can reproduce a situation where it takes three fast flicks
of the mouse across the pad to undo one slow sweep across the pad. In other
words, extreme reverse acceleration. This does not happen when scaling is
disabled.
Furthermore, any game that uses relative mouse motion events for 3D camera
rotation probably wants the raw mouse deltas and not a value that depends on
scaling and resolution and rounding and truncation. Ideal camera rotation
just takes mouse input, multiplies it by sensitivity, and adds it to the
angle-in-radians or whatever measure is used for yaw & pitch. Pixels and
screen resolution or window dimensions should not be a part of the equation
at all, even if it could be implemented without rounding errors.
[...]
This [patch] completely eliminates angle snapping for me, and makes
sensitivity consistent. In other words, it's completely usable for, say,
aiming in a first person shooter."
Partially fixes Bugzilla #4811.
Caleb Cornett's comments:
"A few weeks ago, Alex added a partial Metal API to SDL2:
https://hg.libsdl.org/SDL/rev/22c8e7cd8d38
I noticed it was missing a few features that would help Metal become a
first-class citizen in SDL, so I went ahead and wrote them! Here are the new
APIs:
1. SDL_WINDOW_METAL flag for SDL_CreateWindow(). This allows the programmer
to specify that they intend to create a window for use with SDL_MetalView.
The flag is used to ensure correct usage of the API and to prevent
accidentally defaulting to OpenGL on iOS.
2. SDL_Metal_GetLayer(). This function takes a SDL_MetalView and returns a
pointer to the view's backing CAMetalLayer. This simplifies things
considerably, since in the current version of the SDL_Metal API the
programmer is required to bridge-cast a SDL_MetalView handle to an NSView or
UIView (depending on the platform) and then extract the layer from there.
SDL_Metal_GetLayer automatically handles all of that, making the operation
simple and cross-platform.
3. SDL_Metal_GetDrawableSize(). This function already exists in the current
SDL_Metal API (and is used behind-the-scenes for SDL_Vulkan_GetDrawableSize
on Apple platforms) but was not publicly exposed. My patch exposes this
function for public use. It works just like you'd expect.
Tested on macOS 10.14 and iOS 12.4."
Fixes Bugzilla #4796.
This does not account for scrollbars nor margins. But is much better then returning the full display size when not running fullscreen, but for example in an iframe.
The first terminator is for input parameters. The second terminator was for the
output parameters.
If an error occurs when calling MakeThreadHighPriority(), e.g. a bad thread id,
then the reply from connection_send_with_reply_and_block() will be null.
Anthony Pesch's notes on his patch:
"Currently, the WASAPI backend creates a stream in shared mode and sets the
device's callback size to be half of the shared stream's total buffer size.
This works, but doesn't coordinate will with the actual hardware. The hardware
will raise an interrupt after every period which in turn will signal the
object being waited on inside of WaitDevice. From my empirical testing, the
callback size was often larger than the period size and not a multiple of it,
which resulted in poor latency when trying to time an application based on the
audio callback. The reason for this looked something like:
* The device's callback would be called and and the audio buffer was filled.
* WaitDevice would be called.
* The hardware would raise an interrupt after one period.
* WaitDevice would resume, see that a a full callback had not been played and
then wait again.
* The hardware would raise an interrupt after another period.
* WaitDevice would resume, see that a full callback + some extra amount had
been played and then it would again call our callback and this process would
repeat.
The effect of this is that the pacing between subsequent callbacks is poor -
sometimes it's called very quickly, sometimes it's called very late.
By matching the callback's size to the stream's period size, the pacing of
calls to the user callback is improved substantially. I didn't write an actual
test for this, but my use case for this was my Dreamcast emulator
(https://redream.io) which uses the audio callback to help drive the emulation
speed. Without this change and with the default shared stream buffer (which
has a period of ~10ms) I would get frame times that were between ~3-30
milliseconds; after this change I get frame times of ~11-22 milliseconds.
Note, this patch also has a change that removes passing a duration to the
Initialize call. It seems that the default duration used (when 0 is passed)
does typically match up with the duration returned by GetDevicePeriod, however
the Initialize docs say:
> To set the buffer to the minimum size required by the engine thread, the
> client should call Initialize with the hnsBufferDuration parameter set to 0.
> Following the Initialize call, the client can get the size of the resulting
> buffer by calling IAudioClient::GetBufferSize.
This change isn't strictly required, but I made it to hopefully rule out
another source of unexpected latency."
Fixes Bugzilla #4592.
If called from background threads, use Grand Central Dispatch to use the
main thread instead. On the main thread, just call them directly.
Fixes Bugzilla #4932.
Apparently, recent versions of autotools will issue an error if an empty
description is supplied to AC_DEFINE(). Avoid these errors by just
adding a space in the square brackets.
Partially fixes Bugzilla #4908.
The warnings were produced by GCC 9.2.x for x86_64-linux-gnu or
i386-pc-msdosdjgpp targets.
Most of the fixes involve changing the type of a variable rather than
the format specifier. For many of the affected test conuter variables,
a basic int seems sufficient.
Some format specifier warnings still remain for cases where changing
type or casting seemed inappropriate. Those warnings will probably
require some new format specifier macros (e.g. SDL_PRIu32).
Jason
In iOS, URL Events trigger the DropFile event. I would also expect the same event to be fired on the macOS platform but this is not implemented at all in the AppDelegate.
Konrad
It appears that I cannot use SDL_RenderReadPixels on a bound framebuffer (SDL_Texture set as render target) as it simply results in gibberish data. However, drawing that framebuffer into the default target (window surface) does render it correctly. Other backends (OpenGL, software, Direct3D) do work fine.
It looks to me like D3D11_RenderReadPixels just gets the general backbuffer and not the current render target and its backbuffer.
Here is the patch which actually fetches the current render target and its underlying ID3D11Resource which is ID3D11Texture2D.
DominikD
There are several tests that need resources in the output directory to work:
* `testiconv` depends on `utf8.txt`
* `testoverlay2` and `teststreaming` depend on `moose.dat`
This patch adds these two files to the `RESOURCE_FILES` variable.
One could also copy `shapes\*.bmp` over to the output directory for `testshape` to use but this patch doesn't do that for three reasons:
* executable takes path as an argument and doesn't need these files side by side
* these are ~45MB and copying them over would cause build directory to swell
* there are already files in the output directory that can be used with this test (`sample.bmp` and `button.bmp`)
There are multiple SDL APIs that internally sink into dbus calls, e.g. battery
status, thread priority. If those calls happen in different threads simultaneously
it can result in dbus crashes.
To abide by dbus's multithreading guidelines we must call dbus_threads_init_default()
to enable dbus's internal locking mechanisms:
https://dbus.freedesktop.org/doc/api/html/group__DBusThreads.html#gac7b8a7001befc3eaa8c6b043151008dc
Additionally, access to a DBusMessage must be synchronized between threads.
SDL was already abiding that guideline as the DBusMessage structs aren't shared.
The following email from the dbus mailing list hints that arbitrating access to
the DBusConnection on the SDL may also be required:
https://lists.freedesktop.org/archives/dbus/2017-September/017306.html
Currently the message is double terminated, which results in SDL_DBus_CallMethodInternal()
incorrectly assuming that the other party is always returning true.
I'm not super familiar with dbus, so I'm not sure if this could also be the cause of this bug:
https://github.com/ValveSoftware/steam-for-linux/issues/6901
So if you go into System Preferences on a MacBook and toggle between a pair of
connected bluetooth headphones and built-in internal speakers, SDL will
switch the device it is playing sound through, to match this setting, on the
fly.
Likewise if the default output device is a USB thing and is unplugged; as the
default device changes at the system level, SDL will pick this up and carry
on with the new default. This is different from our unplug detection for
specific devices, as in those cases we want to send the app a disconnect
notification, instead of migrating transparently as we now do for default
devices.
Note that this should also work for capture devices; if the device changes,
SDL will start recording from the new default.
Fixes Bugzilla #4851.
This avoids the need to malloc something extra, use a semaphore, etc, and
fixes Emscripten with pthreads support, which might not spin up a web worker
until after SDL_CreateThread returns and thus can't wait on a semaphore at
this point in any case.
Fixes Bugzilla #5064.
Build with directfb is broken due to a spurious '}' and a missing 'E'
since version 2.0.12 and https://hg.libsdl.org/SDL/rev/4c2dcf490cba:
/home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c: In function 'SetBlendMode':
/home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c:202:9: error: case label not within a switch statement
202 | case SDL_BLENDMODE_MUL:
| ^~~~
/home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c:205:67: error: 'DSBF_DSTCOLOR' undeclared (first use in this function); did you mean 'DSBF_DESTCOLOR'?
205 | SDL_DFB_CHECK(destsurf->SetSrcBlendFunction(destsurf, DSBF_DSTCOLOR));
| ^~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/83ccefee68c2800c0544e6f40fa8bc8ee6b67b77
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Andrei Kortunov
Hello. I try to implement an application for Android, which uses a new sensors API from 2.0.9 to control a camera rotation via built-in gyroscope, using the code from the test/testsensor.c as an example.
Gyroscope input itself works well, but an interval between SDL_SENSORUPDATE events is about 200ms (the SENSOR_DELAY_NORMAL, I believe), when I need the interval about 20-40ms (the SENSOR_DELAY_GAME or SENSOR_DELAY_FASTEST).
Test apps in Xcode-iOS/Test/TestiPhoneOS.xcodeproj weren't launching
in the most-recent release of Xcode and the iOS Simulator (version 11.3.1).
This was caused by their shared Info.plist file not defining a
CFBundleShortVersionString (as reported by Xcode, when launching a test
app from within Xcode).
If a driver's implementation of CreateWindowFramebuffer sets the window
surface, use that rather than overwriting it. A driver may set the window
surface if data cannot be passed via the CreateWindowFramebuffer output
parameters (e.g. surface palette colors).
Otherwise our cached state goes out of sync when updating a texture. Since
these state changes aren't necessary, they were removed instead of updating
the cached state.
Fixes Bugzilla #4998.
bluenaxela+sdl
I've noticed that the Switch Pro Controller hidapi driver does not report battery levels when connected via Bluetooth, despite having code for setting joystick->epowerlevel.
This is caused by the driver always using k_eSwitchInputReportIDs_SimpleControllerState via Bluetooth. Using that mode means that the state reports you get back from the controller do not include battery state. Not using the full controller state over Bluetooth effectively makes this driver's support for setting joystick->epowerlevel entirely pointless, only ever reporting SDL_JOYSTICK_POWER_WIRED.
Is there a reason this was set to only use SimpleControllerState via Bluetooth?
I've attached a patch I'm using to allow getting battery level for the Switch Pro Controller.
A couple notes about this patch:
1) It changes LoadStickCalibration to accept the input_mode that is selected, because that's really what should determine what is used for stick extents, since stick extents differ between the modes.
2) In my patch I only use FullControllerState when the vid/pid matches the official Switch Pro Controller, as a cautionary measure in case some third-party controllers have problems with FullControllerState mode via Bluetooth (I noticed a HORI Wireless Switch Pad I had seemed to not read controller calibration correctly for stick extents. Maybe it's calibration data was uninitialized on account of having never been used with a Switch? I'm unsure, though if that guess is right maybe SDL2 should be detecting an uninitiated calibration state and using some sensible defaults)
There are a number of poorly behaved HID devices that time out on attempts to
read various strings. Rather than end up on an endless treadmill of blacklisting
broken devices, reduce our risk by only querying devices that are gamepads.
SDL_hidapijoystick.c already checks these same usages, so we shouldn't
exclude any working HID devices (caveat below).
This also makes HidP_GetPreparsedData() and HidP_GetCaps() failure skip
the device entirely, but that seems desired. If a device can't even return basic
top-level collection data properly, we want nothing to do with that broken device.
If we do find devices that work with HIDAPI joystick and fail these calls, we can
add an exception via VID+PID matching.
bluenaxela+sdl
The HORI Wireless Switch Pad does not properly connect via bluetooth. I did some debugging and found that the code that tries to control the Home LED causes this controller to disconnect.
This results in a dlsym() call, which causes Emscripten to panic if the game
wasn't explicitly built dlopen support. eglGetProcAddress works just fine on
this platform, so just let that codepath handle it.
Eric Jing
When the project directory path contains spaces, CMake butchers the include path for the hidapi files.
I traced the problem to the cmake/sdlchecks.cmake file at line 1091, which sets flags for the build process. I surrounded the problem flag with double quotes, shown below, and CMake works with spaces in the project directory path.
This is a multi-part fix, and is the 2nd attempt at a fix for Bug 5034. Here
are the problems being addressed:
1. On macOS 10.14.x and earlier, trying to call IOHIDDeviceUnscheduleFromRunLoop
without a prior, paired call to IOHIDDeviceScheduleWithRunLoop, appears to
lead to a crash. A per-device flag has been added to make sure that these
calls are paired.
2. DARWIN_JoystickDetect was free'ing its SDL_joystick's hwdata field
(via FreeDevice) without setting it to NULL, and DARWIN_JoystickRumble wasn't
checking for a NULL hwdata. FreeDevice will now set hwdata to NULL and
DARWIN_JoystickRumble will check for a NULL hwdata.
meyraud705
Added Linux implementation, otherwise you get "Unsupported direction type" error.
Added documentation to explain why one would use SDL_HAPTIC_FIRST_AXIS.
Mathieu Laurendeau
Consider a device supporting effects on multiple axes.
There's currently no way to play effects against a single-axis direction.
A device supporting effects against X and Y may not allow to play effects with a two-axis direction coordinate, even if one of the coordinates is null.
My current (ugly) work around for this is to add a direction type SDL_HAPTIC_X_FORCE to play effects against a X-axis only direction (patch attached).
This issue impacted two GIMX users using the following wheels:
- Leo Bodnar SimSteering force feedback wheel
- Accuforce direct drive wheel
Playing constant/spring/damper effects against a X-axis direction worked well for the first wheel, but not for the second one.
A better strategy seems to play the effects against the first axis reported by the DirectInput enumeration.
This strategy also works with Logitech wheels (at least the DFGT).
It's been more than a year that I have the latest patch (playing effects against the first axis only) in the GIMX software. It's being used by thousands of people, mostly for adapting their FFB wheel to the PS4. I had no report that proves this strategy to be wrong.
Jimb Esser
Add new RawInput controller API, and improved correlation with XInput/WGI
Reorder joystick init so drivers can ask the others if they handle a device reliably
Do not poll disconnected XInput devices (major perf issue)
Fix various cases where incorrect correlation could happen
Simple mechanism for propagating unhandled Guide button presses even before guaranteed correlation
Correlate by axis motion as well as button presses
Fix failing to zero other trigger
Fix SDL_HINT_JOYSTICK_HIDAPI not working if set before calling SDL_Init()
Add missing device to device names
Disable RawInput if we have a mismatch of XInput-capable but not RawInput-capable devices
Updated to SDL 2.0.13 code with the following notes:
New HID driver: xbox360w - no idea what that is, hopefully urelated
SDL_hidapijoystick.c had been refactored to couple data handling logic with device opening logic and device lists caused some problems, yields slightly uglier integration than previously when the 360 HID device driver was just handling the data.
SDL_hidapijoystick.c now often pulls the device off of the joystick_hwdata structure for some rumble logic, but it appears that code path is never reached, so probably not a problem.
Looks like joystick_hwdata was refactored to not include a mutex in other drivers, maintainers may want to do the same refactor here if that's useful for some reason.
Something changed in how devices get names, so getting generic names.
Had to fix a (new?) bug where removing an XInput controller caused existing controllers (that moved to a new XInput index) to get identified as 0x045e/0x02fd ("it's probably Bluetooth" in code), rendering the existing HIDAPI_IsDevicePresent and new RAWINPUT_IsDevicePresent unreliable.
Jimb Esser
Add new RawInput controller API, and improved correlation with XInput/WGI
Reorder joystick init so drivers can ask the others if they handle a device reliably
Do not poll disconnected XInput devices (major perf issue)
Fix various cases where incorrect correlation could happen
Simple mechanism for propagating unhandled Guide button presses even before guaranteed correlation
Correlate by axis motion as well as button presses
Fix failing to zero other trigger
Fix SDL_HINT_JOYSTICK_HIDAPI not working if set before calling SDL_Init()
Add missing device to device names
Disable RawInput if we have a mismatch of XInput-capable but not RawInput-capable devices
Updated to SDL 2.0.13 code with the following notes:
New HID driver: xbox360w - no idea what that is, hopefully urelated
SDL_hidapijoystick.c had been refactored to couple data handling logic with device opening logic and device lists caused some problems, yields slightly uglier integration than previously when the 360 HID device driver was just handling the data.
SDL_hidapijoystick.c now often pulls the device off of the joystick_hwdata structure for some rumble logic, but it appears that code path is never reached, so probably not a problem.
Looks like joystick_hwdata was refactored to not include a mutex in other drivers, maintainers may want to do the same refactor here if that's useful for some reason.
Something changed in how devices get names, so getting generic names.
Had to fix a (new?) bug where removing an XInput controller caused existing controllers (that moved to a new XInput index) to get identified as 0x045e/0x02fd ("it's probably Bluetooth" in code), rendering the existing HIDAPI_IsDevicePresent and new RAWINPUT_IsDevicePresent unreliable.
Malte Kie?ling
I get a build error in SDL_sysjoystick.c:74 for the merged patch, but its nothing to sweat about, just -Werror=declaration-after-statement doing its usual stuff.
David Ludwig
I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps.
The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one.
Use of virtual joysticks goes as such:
1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index.
2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual).
3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent).
Here is a listing of the new, public APIs, at present and subject to change:
------------------------------------------------------------
/**
* Attaches a new virtual joystick.
* Returns the joystick's device index, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats);
/**
* Detaches a virtual joystick
* Returns 0 on success, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index);
/**
* Indicates whether or not a virtual-joystick is at a given device index.
*/
extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index);
/**
* Set values on an opened, virtual-joystick's controls.
* Returns 0 on success, -1 on error.
*/
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick * joystick, int axis, Sint16 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value);
------------------------------------------------------------
Miscellaneous notes on the initial patch, which are also subject to change:
1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical?
2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions).
3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8.
4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above).
5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate.
6. the initial patch is based off of SDL 2.0.12
7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1
Questions, comments, suggestions, or bug reports very welcome!
Ethan Lee
Basically replicating the solution of the Switch Controller's button label issue. Physical layout should take priority unless it's explicitly requested by the user or application!
ciremo6483
In `SDL_iconv_string` the `while (inbytesleft > 0)` loop can end up in a state where it never terminates because the library `iconv` function called from `SDL_iconv` doesn't consume any bytes.
This happened when a `WCHAR_T` input string was being converted to `UTF-8` but contained invalid characters. It would first It would first skip a few bytes due to `case SDL_ICONV_EILSEQ` but when there were 3 bytes remaining of `inbytesleft` `iconv` just didn't consume anything more (but didn't throw an error either).
It just so happens that the Microsoft Classic IntelliMouse `product_string` contains such invalid characters (`"Microsoft? Classic IntelliMouse?"`), meaning the function would get stuck with said mouse plugged in.
A fix for this would be to check if `inbytesleft` was unchanged after an iteration and in that case either decrement the counter like when `SDL_ICONV_EILSEQ` is returned or simply break the loop.
cmediaplayer
Hi, i already mentioned in the SDL discourse a bug that recreating of a texture occours pixel shader problem on direct3d renderer. There is no problem for direct3d11. You can see the issue by using my app named C Media Player which is available for Windows for free using my web site www.cmediaplayer.com. Just follow the steps:
*Open a media file
*When playing the file change the scale quality under the video menu.
*You will see the problem.
Prior to this fix, we would hit the existing_instance >= 0 case and move the joystick
again to a different index than the one requested by the caller. It also breaks the assumption
that a SDL_JoystickID is only present in SDL_joystick_players at one location.
Anthony Pesch
I was just communicating with one of the Retropie developers regarding this.
This change removed the forced window focus change on creation (https://github.com/inolen/SDL-mirror/commit/3534cb3793f4744509f020f1267f510ec7099366) as part of the change no longer assumes there's only a single window being created. This was perhaps an over-aggressive removal.
Due to that change, joystick events are only received if SDL_SetKeyboardFocus is called explicitly, or if the app has specified SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS.
I think that part of my change should be reverted to continue setting mouse / keyboard focus to the window being created. If SDL_WINDOW_INPUT_FOCUS is to be used as an input flag the code could be conditional, but that would still leave existing software broken.
The 8BitDo SF30 Pro Gamepad will generate a single motor pulse for each rumble message, so we need to do this frequently to have continous rumble on this device.
pelya
KaiOS is an OS for feature phones, with numeric keypad and non-touch screen, and typically 512 Mb RAM and 4 Gb flash.
It is based on Firefox OS, all apps are made with HTML5 and Javascript. SDL can be cross-compiled using emscripten and packaged as native app.
This patch adds support for star '*' and pound '#' keys on such phones to generate SDL events.
It appears that with some (presumably) flaky drivers or hardware that the WriteFile in hid_write never completes leading to GetOverlappedResult to block forever waiting for it.
This fixes compilation errors that occur when trying to compile SDL2 for
a X11-less target. The errors were due to the fact that Mesa will
include X11 headers unless a couple of macros are defined.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Jake Breen
When I run SDL_INIT with SDL_INIT_JOYSTICK it stalls for about 10 seconds (last report was 10,615ms), but only if I'm currently playing audio. (Like in Spotify for example.)
querying something related to device access (last dll loaded)
'BabbysFirst64.exe' (Win32): Loaded 'C:\Windows\SysWOW64\deviceaccess.dll'.
I use a USB DAC because my mobo's audio out is pretty not great. And I've noticed unplugging it seems to solve the issue. I haven't noticed any other issues that are caused by my DAC.
My DAC is the Sound BlasterX G1 https://us.creative.com/p/gaming-headsets/sound-blasterx-g1
Vid = 041E
PID = 3249
My system specs:
- Windows 10 Pro
- Ryzen 2700x
- 16GB Ram
- Nvidia 2070 RTX
Additional USB devices plugged in:
- Valve Index
- Xbox One Elite Controller
Charles Huber
This patch fixes the segfault on my Pi, though the valid display index range reported by the CHECK_DISPLAY_INDEX() macro in src/video/SDL_video.c is a little weird:
$ SDL_VIDEO_EGL_DRIVER=libEGL.so SDL_VIDEO_GL_DRIVER=libGLESv2.so ./a.out
SDL_Init(): displayIndex must be in the range 0 - -1
rofferom
I have an annoying issue on MacOS about XBoxOne Bluetooth rumble (Vendor: 0x045e, Product: 0x02fd).
When 360controller is installed, rumble is working correctly. However, Bluetooth rumble isn't working at all, with or without 360controller installed (although it is working with Chrome + https://html5gamepad.com).
I looked at the code, and it seems that XBox controllers are managed in MacOS in this file: SDL_hidapi_xbox360.c. The XBoxOne file is disabled for MacOS in SDL_hidjoystick_c.h.
The function HIDAPI_DriverXbox360_Rumble() is called correctly, and hid_write() returns no error.
I have tried a stupid test. I took the rumble packet from 360controller: https://github.com/360Controller/360Controller/blob/ec4e88eb2d2535e9b32561c702f42fb22b0a7f99/XBOBTFF/FFDriver.cpp#L620. With the patch I have attached, I manage to have rumble working on Bluetooth (with some stupid vibration level, but it proves it can if the packet is changed).
But it breaks the USB rumble with 360controller. A comment in the function makes an explicit reference to 360controller, I think that's why I have broken this specific usecase.
I don't know what is the correct way to fix this, but it seems that the current implementation has a missing case for Bluetooth support.
Note that I also tested master this morning, and I have another issue:
if (!device->ffservice) {
return SDL_Unsupported();
}
test fails in DARWIN_JoystickRumble(). This test has been done quickly, I'm not totaly confident about its accuracy.
Elmar
creating a fullscreen window with SDL_CreateWindow(..SDL_WINDOW_FULLSCREEN_DESKTOP..) in MacOS works fine, except if it was triggered by the user with the green knob in the top left window title bar.
Then "something" is different, and SDL_CreateWindow hangs for 15-20 seconds (tested in MacOS 10.13 and 10.14).
Responsible for the hang is this code in SDL_cocoawindow.m - Cocoa_SetWindowFullscreenSpace:
const int maxattempts = 3;
int attempt = 0;
while (++attempt <= maxattempts) {
/* Wait for the transition to complete, so application changes
take effect properly (e.g. setting the window size, etc.)
*/
const int limit = 10000;
int count = 0;
while ([data->listener isInFullscreenSpaceTransition]) {
if ( ++count == limit ) {
/* Uh oh, transition isn't completing. Should we assert? */
break;
}
SDL_Delay(1);
SDL_PumpEvents();
}
if ([data->listener isInFullscreenSpace] == (state ? YES : NO))
break;
/* Try again, the last attempt was interrupted by user gestures */
if (![data->listener setFullscreenSpace:(state ? YES : NO)])
break; /* ??? */
}
One trivial workaround is to change 'const int limit = 10000' to 500. Then the freeze is so short that it doesn't look like a freeze to the user.
Looking further into the problem, I observed that the function Cocoa_SetWindowFullscreenSpace recursively calls itself via some ObjectiveC messages. I managed to extract a callstack for this (copied below): Note how Cocoa_SetWindowFullscreenSpace in stack line 22 calls SDL_PumpEvents, which eventually arrives at SDL_SendWindowEvent, which calls SDL_UpdateFullscreenMode (stack line 0), which then calls Cocoa_SetWindowFullscreenSpace again (not shown). This recursive second call is the one that hangs.
Another "solution" that worked for me was to add a flag to SDL_Window that is set in Cocoa_SetWindowFullscreenSpace and causes this function to return immediately if called from itself.
Obviously, this is also an ugly hack, but I don't have enough time to dive into this crazy Cocoa/ObjectiveC business deep enough to find a proper solution. But hopefully it's easy for one of the experts around.
Note that there is a "failure to go fullscreen"-message involved, maybe using the green knob causes this failure at first.
I can unfortunately not provide a minimum example.
Best regards,
Elmar
0 com.yasara.View 0x00000001007495af SDL_UpdateFullscreenMode + 207
1 com.yasara.View 0x00000001006e2591 SDL_SendWindowEvent + 401
2 com.yasara.View 0x0000000100775a72 -[Cocoa_WindowListener windowDidResize:] + 370
3 com.yasara.View 0x0000000100776550 -[Cocoa_WindowListener windowDidExitFullScreen:] + 512
4 com.apple.AppKit 0x00007fff3180a2a4 -[_NSWindowEnterFullScreenTransitionController failedToEnterFullScreen] + 692
5 com.apple.AppKit 0x00007fff31c59737 -[_NSEnterFullScreenTransitionController _doFailedToEnterFullScreen] + 349
6 com.apple.AppKit 0x00007fff3172aa53 __NSFullScreenDockConnectionSendEnterForSpace_block_invoke + 135
7 libxpc.dylib 0x00007fff6114b9b1 _xpc_connection_reply_callout + 36
8 libxpc.dylib 0x00007fff6114b938 _xpc_connection_call_reply_async + 82
9 libdispatch.dylib 0x00007fff60ec7e39 _dispatch_client_callout3 + 8
10 libdispatch.dylib 0x00007fff60ede3b0 _dispatch_mach_msg_async_reply_invoke + 322
11 libdispatch.dylib 0x00007fff60ed2e25 _dispatch_main_queue_callback_4CF + 807
12 com.apple.CoreFoundation 0x00007fff33d39e8b __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 9
13 com.apple.CoreFoundation 0x00007fff33d3959a __CFRunLoopRun + 2335
14 com.apple.CoreFoundation 0x00007fff33d38a28 CFRunLoopRunSpecific + 463
15 com.apple.HIToolbox 0x00007fff32fd1b35 RunCurrentEventLoopInMode + 293
16 com.apple.HIToolbox 0x00007fff32fd1774 ReceiveNextEventCommon + 371
17 com.apple.HIToolbox 0x00007fff32fd15e8 _BlockUntilNextEventMatchingListInModeWithFilter + 64
18 com.apple.AppKit 0x00007fff3128deb7 _DPSNextEvent + 997
19 com.apple.AppKit 0x00007fff3128cc56 -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 1362
20 com.yasara.View 0x000000010076fab2 Cocoa_PumpEvents + 290
21 com.yasara.View 0x00000001006dd1c7 SDL_PumpEvents_REAL + 23
22 com.yasara.View 0x00000001007795cf Cocoa_SetWindowFullscreenSpace + 223
23 com.yasara.View 0x000000010074970b SDL_UpdateFullscreenMode + 555
24 com.yasara.View 0x00000001006e2476 SDL_SendWindowEvent + 118
25 com.yasara.View 0x0000000100774ff7 -[Cocoa_WindowListener resumeVisibleObservation] + 135
26 com.yasara.View 0x000000010077664c Cocoa_ShowWindow + 188
27 com.yasara.View 0x0000000100749492 SDL_FinishWindowCreation + 546
28 com.yasara.View 0x0000000100748da5 SDL_CreateWindow_REAL + 1573
29 com.yasara.View 0x000000010010d9b1 vga_setvideomode + 1347
30 com.yasara.View 0x00000001003f0d46 mod_initscreen + 2614
31 com.yasara.View 0x00000001003f344b mod_reinitscreen + 460
32 com.yasara.View 0x00000001003f370d mod_resizescreen + 383
33 com.yasara.View 0x0000000100418e39 mod_main + 815
34 com.yasara.View 0x000000010029ca5d main2 + 5766
35 com.yasara.View 0x000000010011d1b7 main.main_cpuok + 19
Ethan Lee
Attached is a diff that I used to get SetThreadPriority working locally. I still have no idea what the minimum SDK version is since Microsoft never documented it, but it's worth pointing out that they're much more aggressive about using the latest VS and UWP SDK anyway (for example, an updated Xbox is no longer compatible with VS2017, and updates are required to have a network connection of any kind).
Malte Kie?ling
At the moment i get following warnings from kmsdrm:
* in SDL_kmsdrmvideo.c KMSDRM_DestroySurfaces is return type int, but thats never returned or checked against
* in SDL_kmsdrmvideo.c KMSDRM_DestroySurfaces the variable viddata is not used
* in SDL_kmsdrmopengles.c KMSDRM_GLES_LoadLibrary a cast to NativeDisplayType is missing
I attached a patch for them :)
- Regression of test_1.c of bug 3827, after fix from bug 4798.
- Blending is also needed when the palette contains alpha value, but not necessarily colorkey.
- Clean up SDL_ConvertColorkeyToAlpha which doesn't seem to need 'ignore_alpha' parameter any-more.
(see bug 3827)
A good metric of this is when the titlebar's "minimize" button is reenabled,
which doesn't happen by the time windowDidExitFullscreen triggers.
This fixes minimizing a fullscreen window on macOS.
Fixes Bugzilla #4177.
This is the OpenGL line drawing fix for Bugzilla #3182, but there's some
disagreement about what the renderers should do here, so I'm backing this out
until after 2.0.12 ships, and then we'll reevaluate all the renderer backends
to decide what's correct, and make them all work the same.
Mohamed
It would be useful to be able to do either `#include "SDL2/SDL.h"` or `#include "SDL.h"`. This patch allows that and adds compatibility with other build systems. It also allows differentiating between SDL1 and SDL2.
Vitaly Novichkov
Recent attempt to build a recent HG state of SDL2 via AppVeyor gives the failure:
https://ci.appveyor.com/project/Wohlstand/sdl-mixer-x/builds/30821858/job/359gqvypi2f18nok
```
C:\projects\sdl-mixer-x\build-MinGW-w32-MinSizeRel-Win32-VB6-Binding\external\AudioCodecs\src\AudioCodecs-build\external\SDL2\src\SDL2HG\src\dynapi\SDL_dynapi_procs.h:56:29: error: conflicting types for 'SDL_CreateThread'
SDL_DYNAPI_PROC(SDL_Thread*,SDL_CreateThread,(SDL_ThreadFunction a, const char *b, void *c),(a,b,c),return)
Malte Kie?ling
Since https://hg.libsdl.org/SDL/rev/f908bd722523 / bug 4966 i cannot build SDL anymore. The error i get is, essentially, caused by -Werror=declaration-after-statement in SDL_kmsdrmvideo.c and SDL_kmsdrmopengles.c
Wait up to 100 milliseconds, since the window manager might alter or
outright veto the window change...or not respond at all.
In a well-functioning system, though, this should help make sure
that SDL_SetWindowPosition's results match reality.
Fixes Bugzilla #4646.
OpenGL apparently needs to not do any drawing between wl_egl_window_resize
and eglSwapBuffers, but Vulkan apps don't use SDL to present, so they
never call into an equivalent of SDL_GL_SwapWindow where our Wayland code
was handling pending resize work.
Fixes Bugzilla #4722.
This is obnoxious and wrong, but the patch that activates the Dock before
activating the app fixes the _menu_ not responding on Catalina, but the
first window created by the app won't have keyboard focus without a small
delay inserted.
This obviously needs a better solution, but it gets it limping along correctly
for now.
sjordan
We did some investigations into a different direction which I would like to share. As mentioned previously the scaling setting in the preferences play an important role for our problem and they also hint towards an issue with point/pixel scaling factors.
We found an interesting correlation between our fail case and the behavior of [nsWindow.screen backingScaleFactor]. It turns out that whenever we encounter the fail case the scale factor is zero when we print it quickly after calling SDL_CreateWindow. After some time the value changes to a non-zero value. In the success case the scaling factor is nonzero 'immediately'. Note that we don't use that factor. We also find that the window backingScaleFactor does not show the strange behavior even in the fail case.
We have also attempted to find out whether any event triggers the transition from zero to non-zero. We found the transition happening when we call SDL_PollEvent. We can even force this to happen by explicitly adding a SDL_PollEvent at an early stage, but it will only happen if a certain amount of time elapsed, so we need to add some sleep before the call to trigger the transition at an earlier stage. All that seems to imply that the transition happens async and that SDL_PollEvent merely causes the system to update its internal state at that time.
We have also verified that the scaling setting in the preferences does NOT directly correlate to the scaling factor behavior. We find that a particular scaling setting can lead to a fail case for one resolution and a success case for another resolution. This shows that the scaling setting alone does not determine whether the problem will appear or not.
We have also verified on another Mac with 10.14 that the scaling factor is always non-zero and we always have the success case.
I have no idea how to interpret this initial-zero behavior and haven't found any usable information on the screen backing scale factor. It seems as 10.15 does some stuff more async than before and maybe the problem could be caused by unfortunate timings. I would be very interested to hear your opinion about that.
...
Finally we found the cause of all our problems: it's the origin hack in Cocoa_SetWindowFullscreen:
/* Hack to fix origin on Mac OS X 10.4 */
NSRect screenRect = [[nswindow screen] frame];
if (screenRect.size.height >= 1.0f) {
rect.origin.y += (screenRect.size.height - rect.size.height);
}
If we comment this one out our game and testdraw2 do behave correctly.
It turns out that if a window is not fully contained in the screen, it's screen property becomes zero and therefore we saw a zero when printing the backing scale factor (although it's not clear why it became nonzero later).
We suggest to add a runtime check which skips this code for 10.15 (or possibly earlier if you happen to know that the hack is not needed for certain older versions).
More info: consider the line
NSRect screenRect = [[nswindow screen] frame];
in Cocoa_SetWindowFullscreen. We found that this rect has the dimensions of the desktop
on our OS X 10.15 setup. This is true both for the success case and the fail case. It seems as the success case is actually a fail case in disguise.
On the other Mac with OS X 10.14 the same rect has the dimension of the newly created screen. This is what I would expect, because at that time the window has already been created successfully and there should be a newly created screen associated to the window.
What are the cases in which the whole origin conversion code for the fullscreen case is supposed to have a non-trivial result?
Today we found that if we print the dimensions of [nswindow screen] later, then we find them to be correct. So the conclusion seems to be that OS X 10.15 does indeed do the window/screen setup more async than before and that the origin correction code uses the [nswindow screen] at a time where the window/screen setup isn't finalized yet.
It was done to allow hotkey resizing of borderless windows, but Windows will sometimes draw it, regardless of our WM_* message handling. See bug 4466 for more details.
Alex Denisov
When using Win10 on-screen keyboard (tooltip.exe), the left and right cursor keys in it do not produce SDLK_LEFT and SDLK_RIGHT events.
Windows messages generated by the on-screen keyboard, for some reason, have their scancodes set to zeroes. Here is the log from Spy++:
WM_KEYDOWN nVirtKey:VK_LEFT cRepeat:1 ScanCode:00 fExtended:0 fAltDown:0 fRepeat:0 fUp:0
WM_KEYUP nVirtKey:VK_LEFT cRepeat:1 ScanCode:00 fExtended:0 fAltDown:0 fRepeat:1 fUp:1
Regular physical keyboard produces VK_LEFT (ScanCode:4B) and VK_RIGHT (ScanCode:4D) which are interpreted correctly.
With on-screen keyboard, the switch statement in VKeytoScancode() does not check for VK_LEFT and VK_RIGHT, returning SDL_SCANCODE_UNKNOWN, which in turn does not get mapped to anything (because the scan codes are zeroes).
Add an include on SDL_error.h to avoid the following build failure
without threads:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/8.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: build/.libs/SDL_threadprio.o: in function `SDL_LinuxSetThreadPriority_REAL':
SDL_threadprio.c:(.text+0x0): undefined reference to `SDL_Unsupported'
Fixes:
- http://autobuild.buildroot.org/results/7f7712c5bd47de4a3fcec1e0d0526fd5a3ecd532
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Likewise for the GLES1 and GLES2 renderers.
This solves the missing pixel at the end of a line and removes all the
heuristics for various platforms/drivers. It's possible we could still use
GL_LINE_STRIP with this and save some vertex buffer space, assuming this
doesn't upset some driver somewhere, but this seems to be a clean fix that
makes the GL renderers match the software renderer output.
Diamond-exit rule explanation:
http://graphics-software-engineer.blogspot.com/2012/04/rasterization-rules.html
Fixes Bugzilla #3182.
Anthony Pesch
* Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit.
* Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation.
* Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing.
* Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially.
* Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support.
These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520.
As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes.
I've made a few small changes to the logic that had thrown me off originally and rebased the changes:
* The condition wrapping the call to release buffer was incorrect.
* The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed.
* Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
meyraud705
In SDL_hidapi_switch.c
line 443: Function BTrySetupUSB call WriteProprietary with pBuf=NULL and ucLen=0
line 376: WriteProprietary check its input (!pBuf && ucLen > 0) || ucLen > sizeof(packet.rgucProprietaryData): ucLen is 0 so it passes
line 382: WriteProprietary call memcpy with pBuf=NULL
meyraud705
Dualshock4 on bluetooth need 78 bytes for the rumble data while SDL_HIDAPI_RumbleRequest can only hold 64 bytes.
'volatile' is not meant for thread synchronization.
The list of rumble request could grow infinitely if user call SDL_JoystickRumble too much. The documentation says "Each call to this function cancels any previous rumble effect", so overwriting pending request seem like a good idea.
This fixes a crash whereby SDL could crash on macOS/Darwin, if and when a
USB game controller gets unplugged. SDL was not retaining a reference
to the controller's OS/IOKit-provided 'device object', and was capable
of trying to use it, after a device was hot-unplugged.
There is now a thread that handles all HIDAPI rumble requests and a lock that guarantees that we're not reading and writing the device at the same time.
The index and indices were swapped; Which is fine as long as there are
no gaps in the ABS_HAT* event availability but otherwise things do get confused.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cameron Cawley
This adds a number of files used by the build systems to the .hgignore file. Most of them are for CMake, but there are other additions as well.
Malte
clion builds into cmake-build-debug, cmake-build-release etc. by default. Also, it creates the .idea forlder in wich it places some (mostly local) config.
Since SDL is perfectly buildable from within the IDE, i think it'd be nice to have the build and ide artifacts ignored by hg.
Martin Fiedler
To be precise, this is about *desktop OpenGL* on X11. For OpenGL ES, EGL is already used (as it's the only way to get an OpenGL ES context), as Sylvain noted above.
To shine some light on why this is needed:
In 99% of all cases, using GLX on X11 is fine, even though it's effectively deprecated in favor of EGL [1]. However, there's at least one use case that *requires* the OpenGL context being created with EGL instead of GLX, and that's DRM_PRIME interoperability: The function glEGLImageTargetTexture2DOES simply doesn't work with GLX. (Currently, Mesa actually crashes when trying that.)
Some example code:
https://gist.github.com/kajott/d1b29c613be30893c855621edd1f212e
Runs on Intel and open-source AMD drivers just fine (others unconfirmed), but with #define USE_EGL 0 (i.e. forcing it to GLX), it crashes. The same happens when using SDL for window and context creation.
The good news is that most of the pieces for EGL support on X11 are already in place: SDL_egl.c is pretty complete (and used for desktop OpenGL on Wayland, for example), and SDL_x11opengl.c has the aforementioned OpenGL-ES-on-EGL support. However, when it comes to desktop OpenGL, it's hardcoded to fall back to GLX.
I'm not advocating to make EGL the default for desktop OpenGL on X11; don't fix what ain't broken. But something like an SDL_HINT_VIDEO_X11_FORCE_EGL would be very appreciated to make use cases like the above work with SDL.
[1] source: Eric Anholt, major Linux graphics stack developer, 7 years ago already - see last paragraph of https://www.phoronix.com/scan.php?page=news_item&px=MTE3MTI
Luis Caceres
The current handling of Wayland mouse pointer events only handles wl_pointer.axis events, which, according to the Wayland documentation, deal with mouse wheel scroll events on a continuous scale. While this is reasonable for some input sources (e.g. touchpad two-finger scrolling), it is not for mouse wheel clicks which generate wl_pointer.axis events with large deltas.
This patch adds handling for wl_pointer.axis_discrete and wl_pointer.frame events and prefers to report SDL_MouseWheelEvent in discrete units if they are available. This means that for mouse wheel scrolling we count in clicks, but for touchpad two-finger scrolling we still use whatever units Wayland uses. This behaviour is closer to that of the X11 backend.
Since these events are only available since version 5 of the wl_seat interface, this patch also checks for this and falls back to the previous behaviour if its not available. I also had to add definitions for some of the pointer and keyboard events specified in versions 2-5 but these are just stubs and do nothing.
Make sure the thread is actually paused, and context backep-up, before
SurfaceView is destroyed (eg surfaceDestroyed() actually returns).
Add a timeout when surfaceDestroyed() is called, and check 'backup_done' variable.
It prevents crashes like:
#00 pc 000000000000c0d0 /system/lib64/libutils.so (android::RefBase::incStrong(void const*) const+8)
#01 pc 000000000000c7f4 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::UpdateBufferList(ANativeWindowBuffer*)+284)
#02 pc 000000000000c390 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::DequeueBuffer()+240)
#03 pc 000000000000bb10 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::GetBuffer(EglSubResource*, EglMemoryDesc*)+64)
#04 pc 000000000032732c /vendor/lib64/egl/libGLESv2_adreno.so (EglWindowSurface::UpdateResource(EsxContext*)+116)
#05 pc 0000000000326dd0 /vendor/lib64/egl/libGLESv2_adreno.so (EglWindowSurface::GetResource(EsxContext*, EsxResource**, EsxResource**, int)+56)
#06 pc 00000000002ae484 /vendor/lib64/egl/libGLESv2_adreno.so (EsxContext::AcquireBackBuffer(int)+364)
#07 pc 0000000000249680 /vendor/lib64/egl/libGLESv2_adreno.so (EsxContext::Clear(unsigned int, unsigned int, unsigned int, EsxClearValues*)+1800)
#08 pc 00000000002cb52c /vendor/lib64/egl/libGLESv2_adreno.so (EsxGlApiParamValidate::GlClear(EsxDispatch*, unsigned int)+132)
Improve handling of landscape/portrait orientation. Promote to SCREEN_ORIENTATION_SENSOR_* when needed.
Android window can be somehow resizable.
If SDL_WINDOW_RESIZABLE is set, window size change is allowed, for instance when orientation changes (provided the hint allows it).
Konrad
I took the liberty of rewriting this function a bit as it seemed to be unnecessary extended with ifs regarding flags (we can check everything in one pass which seem to be the thing which confuses Visual C++ 2019 as well).
Also, I have made CPU features an int instead of uint because if we check it against flags which are all ints it might as well just be int (no signed/unsigned bitwise comparison).
Konrad
This kind of blending is rather quite useful and in my opinion should be available for all renderers. I do need it myself, but since I didn't want to use a custom blending mode which is supported only by certain renderers (e.g. not in software which is quite important for me) I did write implementation of SDL_BLENDMODE_MUL for all renderers altogether.
SDL_BLENDMODE_MUL implements following equation:
dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA))
dstA = (srcA * dstA) + (dstA * (1-srcA))
Background:
https://i.imgur.com/UsYhydP.png
Blended texture:
https://i.imgur.com/0juXQcV.png
Result for SDL_BLENDMODE_MOD:
https://i.imgur.com/wgNSgUl.png
Result for SDL_BLENDMODE_MUL:
https://i.imgur.com/Veokzim.png
I think I did cover all possibilities within included patch, but I didn't write any tests for SDL_BLENDMODE_MUL, so it would be lovely if someone could do it.
This sequence works across Microsoft, PowerA, PDP, and HORI controllers.
The newer Microsoft XBox firmware requires synchronizing the rumble sequence number, when SDL sees it after the initial connect
The Razer Wildcat controller requires waiting for init responses before continuing the initialization sequence.
The PDP Battlefield 1 controller takes over a second to be ready for initialization, and if initialization is attempted before then, it will fail.
Use XGetKeyboardControl to initialize the current XKeyboardState, and
skip XAutoRepeatOn invocation if global_auto_repeat is AutoRepeatModeOn.
This fixes SDL2 when the X11 client is untrusted.
Do not try to guess MIT_SHM extension availability from the string
returned by XDisplayName, use the appropriate API instead.
This fixes SDL2 inside hasher.
Christoph Charles
The new source files for coremotion sensors don't seem to have been included correctly in configure.in. This leads to the build script ios-build.sh to fail at link time, complaining about missing symbols, namely about missing SDL_COREMOTION_SensorDriver.
Murad
On my system, SDL_GetPowerInfo() returns -1 seconds of battery life left. I have quickly investigated that in my case SDL uses sys interface to get battery data. It tries to read "time_to_empty_now" file which is not always present. However, it is still possible to calculate remaining lifetime using "energy_now" and "power_now" files. This is what my simple patch (included as attachment) tries to accomplish.
Best wishes.
LinGao
We build SDL with Visual studio 2017 compiler on Windows Server 2016, but it failed to build due to error LNK2019: unresolved external symbol memset referenced in function SDL_SetJoystickIDForPlayerIndex with MSVC x64 on Windows on latest default branch. And we found that it can be first reproduced on 0fff06175109 changeset. Could you please help have a look about this issue? Thanks in advance!
Steps to Reproduce:
1.hg clone https://hg.libsdl.org/SDL D:\SDL\src
2.Open a VS 2017 x64 command prompt as admin and browse to D:\SDL
3.msbuild /p:Configuration=Release /p:Platform=x64 /p:WindowsTargetPlatformVersion=10.0.17134.0 VisualC\SDL.sln /t:Rebuild
Actual result:
Creating library D:\SDL\src\VisualC\x64\Release\SDL2.lib and object D:\SDL\src\VisualC\x64\Release\SDL2.exp
SDL_joystick.obj : error LNK2019: unresolved external symbol memset referenced in function SDL_SetJoystickIDForPlayerIndex [D:\SDL\src\VisualC\SDL\SDL.vcxproj]
D:\SDL\src\VisualC\x64\Release\SDL2.dll : fatal error LNK1120: 1 unresolved externals [D:\SDL\src\VisualC\SDL\SDL.vcxproj]
Done Building Project "D:\SDL\src\VisualC\SDL\SDL.vcxproj" (Rebuild target(s)) -- FAILED.
The function we currently use, IOHIDDeviceRegisterRemovalCallback(), often
fails on Catalina with a "__CFRunLoopModeFindSourceForMachPort returned NULL"
error message. Once a removal callback is missed, we will eventually crash when
the joystick is closed attempting to use the invalid IOHIDDeviceRef.
https://forums.developer.apple.com/thread/124444
Konrad
This was something rather trivial to add, but asked at least several times before (I did google about it as well).
It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture.
I needed it for my game as well, so I took the liberty of writing it myself.
This patch adds following functions:
SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode);
SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode);
That way you can change texture scaling on the fly.
Using Wii U GameCube USB adapter with multiple controllers attached and
restarting SDL input in a game results in extra joysticks with NULL name.
HIDAPI_CleanupDeviceDriver() shut down joysticks by iterating through
device->num_joysticks but each HIDAPI_JoystickDisconnected() decreases
device->num_joysticks and shifts joysticks array down. Resulting in only
half of controllers being shutdown. It worked with only 1 controller
attached though.
Disconnect HIDAPI device joystick 0 until there are none left.
Message in the log, when going to background:
"call to OpenGL ES API with no current context (logged once per thread)"
Because of SDL_WINDOWEVENT_MINIMIZED is sent from the Java Activity thread.
It calls SDL_RendererEventWatch(), _WindowEvent() and glFinish() without context.
Solution is to move sending of SDL_WINDOWEVENT_MINIMIZED to the SDL thread.
Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()
Rare exception, not catch-able, which appears when the activity gets in a broken
state.
java.lang.IllegalStateException:
at android.app.FragmentManagerImpl.checkStateLoss (FragmentManagerImpl.java:1323)
at android.app.FragmentManagerImpl.popBackStackImmediate (FragmentManagerImpl.java:493)
at android.app.Activity.onBackPressed (Activity.java:2215)
at org.libsdl.app.SDLActivity.onBackPressed (SDLActivity.java)
at android.app.Activity.onKeyUp (Activity.java:2193)
at android.view.KeyEvent.dispatch (KeyEvent.java:2685)
at android.app.Activity.dispatchKeyEvent (Activity.java:2423)
at org.libsdl.app.SDLActivity.dispatchKeyEvent (SDLActivity.java)
For some obscure reason, the order in which the libdrm/libgbm libraries
are loaded matters.
Without this fix, the first call to check_modesetting() will work and
load then unload all symbols properly, but the second call to this
function will lock up as soon as dlopen() is called on libdrm.
Swapping the order in which the libdrm and libgbm libraries are loaded
is enough to fix (or work around?) this issue.
Fixes#4891:
https://bugzilla.libsdl.org/show_bug.cgi?id=4891
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Aaron Barany
I realized I made a minor mistake in my patch: I changed the constructor prototype for SDL_DisplayData, but didn't update the declaration in the .h file. The compiler and linker don't complain, but it would probably be best to fix in case a later change runs into a problem from the mismatch. I have attached a patch to fix this.
meyraud705
On a Dualshock 4 controller using hidapi driver, calling SDL_JoystickRumble with a duration too long (SDL_HAPTIC_INFINITY for example) causes the rumble to stop immediately.
This happens because of integer overflow on line 301 of SDL_hidapi_ps4.c
(https://hg.libsdl.org/SDL/file/a3077169ad23/src/joystick/hidapi/SDL_hidapi_ps4.c#l301), which sets expiration time in the past.
When we initialize the controller it has an internal rumble sequence number, and if our rumble sequence number doesn't match that, rumble won't happen. To fix that we cycle through the range of sequence numbers, and at some point we'll match up with the controller's sequence number and it'll roll forward until it matches our next rumble sequence number.
Aaron Barany
There appears to be no way to directly access the display DPI on iOS, so as an approximation the DPI for the iPhone 1 is used as a base value and is multiplied by the screen's scale. This should at least give a ballpark number for the various screen scales. (based on https://stackoverflow.com/questions/25756087/detecting-iphone-6-6-screen-sizes-in-point-values it appears that both 2x and 3x are used)
I have updated the patch to use a table of current devices and use a computation as a fallback. I have also updated the fallback computation to be more accurate.
Aaron Barany
Add SDL_HINT_VIDEO_EXTERNAL_CONTEXT hint to notify SDL that the graphics context is external. This disables the automatic context save/restore behavior on Android and avoids using OpenGL by default when SDL_WINDOW_VUKLAN isn't set.
When the application wishes to manage the OpenGL contexts on Android, this avoids cases where SDL unbinds the context and creates new contexts, which can interfere with the application's operation.
When using Vulkan and Metal renderer implementations, this avoids SDL forcing OpenGL to be enabled on certain platforms. While using the SDL_WINDOW_VULKAN flag can be used to achieve the same thing, it also causes Vulkan to be loaded. If the application uses Vulkan directly, this is not necessary, and fails window creation when using Metal due to Vulkan not being present. (assuming MoltenVK isn't installed)
Aaron Barany
Since OpenGL is deprecated on iOS, it is advantageous to be able to remove all OpenGL related code when building SDL for iOS. This patch adds the necessary #if checks to compile in this case.
SDL_SendWindowEvent will only send a RESTORED event if the window has
the minimized or maximized flag set. However, for a SHOWN event, it
will clear the minimized flag. Since the SHOWN event was being sent
first for a MapNotify event, the RESTORED event would never be sent.
Swapping the SendWindowEvent calls around fixes this.
https://bugzilla.libsdl.org/show_bug.cgi?id=4821
Calling open() on input devices can generate device I/O which blocks
the main thread and causes dropped frames. Using stat() we can avoid
opening anything unless /dev/input has changed since we last polled.
We could have used something fancy like inotify, but it didn't seem
worth the added complexity for this uncommon non-udev case.
Eric Shepherd
Currently, SDL on Cocoa macOS creates a rudimentary menu bar programmatically if none is already present when the app is registered during setup.
SDL could be much more easily and flexibly used on macOS if upon finding that no menus are currently in place, it first looked for the application's main menu nib or xib file and, if found, loaded that instead of programmatically building the menus.
This would then let developers simply drop in a nib file with a menu bar defined in it and it would be installed and used automatically.
Attached is a patch that does just this. It changes the SDL_cocoaevents.m file to:
* In Cocoa_RegisterApp(), before calling CreateApplicationMenus(), it calls a new function, LoadMainMenuNibIfAvailable(), which attempts to load and install the main menu nib file, using the nib name fetched from the Info.plist file. If that succeeds, LoadMainMenuNibIfAvailable() returns true; otherwise false.
* If LMMNIA() returns false, CreateApplicationMenus() is called to programmatically build the menus as before.
* Otherwise, we're done, and using the menus from the nib/xib file!
I made these changes to support a project I'm working on, and felt they were useful enough to be worth offering them for uplift. They should have zero impact on existing projects' behavior, but make Cocoa SDL development miles easier.
(note from PulkoMandy on Bugzilla #4442 about why this is a desirable patch:
"The event mask: note that the window and GL view run in their own thread
which I don't expect to be too much CPU bound, and will quickly pop these
messages and forward them to the main thread in our SDL code. Therefore the
B_NO_POINTER_HISTORY should be no problem, and is the default on Haiku
anyway (it was not in BeOS, but we changed that and added a
B_FULL_POINTER_HISTORY flag to request the old behavior explicitly). So, this
seems fine.")
Partially fixes Bugzilla #4442.
Michael Roe
The mappings for keyboard scancodes on Linux do not include keypad left and right parentheses (used on some Microsoft keyboard), keypad plus/minus, LANG1 and LANG2 (used on Korean keyboards), XK86MenuKB, and F20 (remapped to Audio Mic Mute in the usual X11 config).
Solra Bizna
I have written a program that, in the event that the user requests more MSAA samples than their hardware supports, attempts to gracefully fall back to the best MSAA available. This code works with my conventional OpenGL renderer, but if I change nothing about the code except to make it request an OpenGL ES profile instead, Xlib kills the program with an error that looks like:
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 4 (X_DestroyWindow)
Resource id in failed request: 0x5c00008
Serial number of failed request: 188
Current serial number in output stream: 193
To trigger the bug, attempt to create a window with the SDL_WINDOW_OPENGL flag, with SDL_GL_CONTEXT_PROFILE_MASK set to SDL_GL_CONTEXT_PROFILE_ES, and with SDL_GL_MULTISAMPLESAMPLES set to any unsupported value. SDL_CreateWindow properly returns NULL, but at this point the program is already doomed. Xlib will shortly terminate the program with an error. Calling SDL_CreateWindow again will immediately trigger this termination.
I have attached a skeletal program that reproduces this bug for me. Replacing SDL_GL_CONTEXT_PROFILE_ES with SDL_GL_CONTEXT_PROFILE_COMPATIBILITY avoids the bug (but, obviously, doesn't create an OpenGL ES context).
As I suspected, the problem was with XDestroyWindow being called twice on the same window. The X11_CreateWindow function in src/video/x11/SDL_x11window.c calls SetupWindowData. If initialization fails after that point, XDestroyWindow gets called on the window by a subsequent call to X11_DestroyWindow. But, later in the same function, iff a GLES context is requested and initializing it fails, X11_XDestroyWindow (which wraps XDestroyWindow) is manually called. Shortly after, the intended call to X11_DestroyWindow occurs, which attempts to destroy the same window again. Boom.
(The above confusing summary involves three separate, similarly-named functions: XDestroyWindow, X11_DestroyWindow, X11_XDestroyWindow)
I have attached a simple patch that removes the redundant X11_XDestroyWindow calls. I've tested that XDestroyWindow still gets called for the windows in question, and that it only gets called once.
Fixes a race where we try to build version res file in build directory
before it has even been created. Prevents errors like:
/bin/bash ../SDL2-2.0.10/build-scripts/updaterev.sh
/bin/bash ../SDL2-2.0.10/build-scripts/mkinstalldirs build
mkdir -p -- build
x86_64-pokysdk-mingw32-windres --include-dir=/home/pokybuild/yocto-worker/meta-mingw/build/build/tmp/work/x86_64-nativesdk-mingw32-pokysdk-mingw32/nativesdk-libsdl2/2.0.10-r0/recipe-sysroot/opt/poky/3.0/sysroots/x86_64-pokysdk-mingw32/usr/include ../SDL2-2.0.10/src/main/windows/version.rc build/version.o
x86_64-pokysdk-mingw32-windres: build/version.o: No such file or directory
Makefile:692: recipe for target 'build/version.o' failed
make: *** [build/version.o] Error 1
make: *** Waiting for unfinished jobs....
touch build/.created
WARNING: exit code 1 from a shell command.
Extension of fix:
https://hg.libsdl.org/SDL/rev/bb65ba8e039b
Signed-off-by: Anuj Mittal <am.devel@gmail.com>
---
configure.ac | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
- _num_clips was not set in constructor, so a NULL _clips could be
mistakenly dereferenced.
- As _clips is accessible outside the class, it is not a good idea to
free/reallocate it. Try to limit this by reallocating only when it needs to
grow.
Partially fixes Bugzilla #4442.
warning: either cast from 'int' to 'size_t' (aka 'unsigned long') is ineffective, or there is loss of precision before the conversion [bugprone-misplaced-widening-cast]
This can happen if a window is still grabbed when we try to move it, or if
the X11 ecosystem is just in a bad mood, I guess.
This makes sure that SDL will report the correct position for a window;
otherwise, SDL_GetWindowPosition will just report whatever the last
SDL_SetWindowPosition call requested, even if the window didn't actually move.
Fixes Bugzilla #4646.
Much of the heavy lifting of this optimization is lifted from the Pixman
project, which is distributed under an MIT-style license. As far as possible,
these elements have been relicensed to the zlib license.
Fixes an issue in macOS 10.15 where the displayed content would move up after entering, exiting and re-entering exclusive fullscreen when certain display modes were used (bug #4822).
Bug #3949 is also related to this change.
Use eglGetProcAddress for everything on EGL >= 1.5. Try SDL_LoadFunction first
for EGL <= 1.4 in case it's a core symbol, and as a fallback if
eglGetProcAddress fails. Finally, for EGL <= 1.4, fallback to
eglGetProcAddress to catch extensions not exported from the shared library.
(Maybe) Fixes Bugzilla #4794.
Sylvain
Seems to be a regression in this commit: https://hg.libsdl.org/SDL/rev/7fdbffd47c0e
SDL_CalculatePitch() was using format->BytesPerPixel, now it uses SDL_BYTESPERPIXEL().
The underlying issue is that "surface->format->BytesPerPixel" is *not* always the same as SDL_BYTESPERPIXEL(format);
BytesPerPixel defined as format->BytesPerPixel = (bpp + 7) / 8;
vs
#define SDL_BYTESPERPIXEL(format) ... (format & 0xff)
Because of SDL_pixels.h format definitions, one is giving a BytesPP 1, the other 0.
Using (1 << 14) instead of 0x4000 might be clearer for the maintainer, but
it makes it harder to look up these flags when debugging an app. The value
has to be written once by one person, the has to be read by tons of people
over and over.
"This patch does the following:
* Instead of SDL_FillRects calling SDL_FillRect in a loop the opposite
happens -- SDL_FillRect (a specific case) calls SDL_FillRects (a general case)
with a count of 1
* The switch/case block is moved out of the loop -- it modifies the color
once and stores the fill routine in a pointer which is then used throughout
the loop"
Fixes Bugzilla #4674.
The 10 ms delay effectively caps input polling at 100 Hz and rendering
at 100 FPS if applications use these functions in their event loop. The
delay may also lead to dropped frames even at 60 FPS due if they are
unlucky enough to hit the delay and rendering takes longer than 6 ms.
fix building with Mesa 19.2
With Mesa 19.2 building fails with:
/include/GLES/gl.h:63:25: error: conflicting types for 'GLsizeiptr'
The same type is defined in include/SDL_opengl.h for OpenGL and the two
headers should not be included at the same time.
This was just never noticed because the same header guard '__gl_h_' was
used. This was changed in Mesa. The result is this error.
Fix this the same way GLES2 already handles this: Don't include the GLES
header when the OpenGL header was already included.
(https://hg.libsdl.org/SDL/rev/6a3670d6108d)
The X11 target sets mouse->last_x and last_y in EnterNotify and then calls
SDL_SendMouseMotion(), which throws away the new position because it matches
the mouse->last_x and last_y we just set, meaning that if the pointer is
in the window when it created, SDL_GetMouseState() will report a position of
0,0 until a MotionNotify event (the pointer moves) arrives and corrects the
mouse state.
Mostly fixes Bugzilla #1612.
The SDL_USE_LIBDBUS define is set inside SDL_debug.h, therefore the
circular dependency made it impossible for this feature to be enabled.
Instead, guard SDL_dbus.h based on the autoconf variable HAVE_DBUS_DBUS_H
Additionally, fix one of the rtkit comments. CAP_SYS_NICE isn't required
to achieve high priority. But there is some scheduler config that rtkit
needs the app to setup.
The Offscreen video driver is intended to be used for headless rendering
as well as allows for multiple GPUs to be used for headless rendering
Currently only supports EGL (OpenGL / ES) or Framebuffers
Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE
Adds testoffscreen.c which can be used to test the backend out
Disabled by default for now
This fills in the CFBundleVersion and CFBundleShortVersionString fields,
if and when SDL's test-apps are built via CMake. This is needed to install
the .app bundles on iOS 13+ (using 'xcrun simctl install booted path/to/testsuchandsuch.app')
To use, set the following CMake variables when running CMake's configuration stage:
- CMAKE_SYSTEM_NAME=tvOS
- CMAKE_OSX_SYSROOT=<SDK> (examples: appletvos, appletvsimulator, appletvos12.4, /full/path/to/AppleTVOS.sdk, etc.)
- CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;x86_64")
When using a recent version of CMake (3.14+), this should make it possible to:
- build SDL for iOS, both static and dynamic
- build SDL test apps (as iOS .app bundles)
- generate a working SDL_config.h for iOS (using SDL_config.h.cmake as a basis)
To use, set the following CMake variables when running CMake's configuration stage:
- CMAKE_SYSTEM_NAME=iOS
- CMAKE_OSX_SYSROOT=<SDK> (examples: iphoneos, iphonesimulator, iphoneos12.4, /full/path/to/iPhoneOS.sdk, etc.)
- CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;armv7s")
Examples:
- for Simulator, using the latest, installed SDK:
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
- for Device, using the latest, installed SDK, 64-bit only
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64
- for Device, using the latest, installed SDK, mixed 32/64 bit
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s"
- for Device, using a specific SDK revision (iOS 12.4, in this example):
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64
- for Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles):
cmake path/to/SDL -DSDL_TEST=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Related Hygon kernel patch can be found on:
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Best regards.
The LE transformation for vec_perm has an implicit assumption that the
permutation is being used to reorder vector elements (in this case 4-byte
integer word elements), not to reorder bytes within those elements. Although
this is legal behavior, it is not anticipated by the transformation performed
by the compilers.
This causes pygame-1.9.1 test failure on PPC64LE because blitted pixmaps are
corrupted there due to how SDL uses vec_perm().
From RedHat / Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1392465
Original patch was provided by: Menanteau Guy <menantea@linux.vnet.ibm.com>
If KMSDRM_drmModeSetCrtc is called when the swap interval is
set to 0, the driver behaves as though vertical sync is engaged by
limiting framerate to the refresh rate, but performance is much worse
than with vertical sync enabled.
Resolve this issue by ensuring that the Crtc is only set up once,
and KMSDRM_drmModePageFlip is called, albeit without any followup
queueing or waiting for flips.
Daniel Drake
A long time ago, it was possible to play neverball on Linux using the accelerometer found in HP laptops.
The kernel exposes the accelerometer as a joystick (/dev/input/jsX) as well as an evdev device (/dev/input/eventX). I guess it worked fine when SDL was using the js interface, but then stopped working here: http://hg.libsdl.org/SDL/rev/fdaeea9e7567
Looking at current code which uses udev to discover joysticks, it looks for the udev tag ID_INPUT_JOYSTICK.
However udev's internal input_id logic specifically tags accelerometers as ID_INPUT_ACCELEROMETER and nothing else.
This looks like a good fit for SDL_HINT_ACCELEROMETER_AS_JOYSTICK.
Ozkan Sezer
As for the issue: This bmp reports bpp=0, therefore SDL_CalculatePitch()
returns pitch==0, which is then fed to SDL_malloc() (which is malloc())
and malloc(0) returns _something_ which is not NULL but not someting
that we expect.. Then testsprite.c:LoadSprite() accesses the pixels
as *(Uint8*)pixels which valrind reports as:
==15533== Invalid read of size 1
==15533== at 0x8048C08: LoadSprite (testsprite.c:45)
==15533== by 0x80492FC: main (testsprite.c:224)
==15533== Address 0x449e588 is 0 bytes after a block of size 0 alloc'd
==15533== at 0x40072B2: malloc (vg_replace_malloc.c:270)
==15533== by 0x4045719: SDL_CreateRGBSurface (SDL_surface.c:126)
==15533== by 0x40403C1: SDL_LoadBMP_RW (SDL_bmp.c:237)
==15533== by 0x8048BB2: LoadSprite (testsprite.c:36)
==15533== by 0x80492FC: main (testsprite.c:224)
Besides, valrind also reports this:
==15533== Conditional jump or move depends on uninitialised value(s)
==15533== at 0x40403F3: SDL_LoadBMP_RW (SDL_bmp.c:247)
==15533== by 0x8048BB2: LoadSprite (testsprite.c:36)
==15533== by 0x80492FC: main (testsprite.c:224)
Easy/quick solution would be early-rejecting a bmp with 0 bpp from SDL_bmp.c:SDL_LoadBMP_RW()
Caleb Cornett
SDL_ShowMessageBox on UIKit doesn't do anything special with buttons that are marked with the flag SDL_MESSAGEBOX_BUTTON_RETURNKEY_DEFAULT. According to Apple's documentation on UIAlertController, a button can respond to a return key if it's marked as the preferredAction of the controller. SDL doesn't set a preferredAction currently, so I've attached a patch to fix that.
Callum McGing
While the CMake build checks for ibus and does enable the ibus backend with set(HAVE_IBUS_IBUS_H TRUE), this does not define SDL_USE_IME, thus CMake built SDL2 (as in Arch Linux) cannot use IME at all.
The attached patch fixes this behaviour when building against ibus. IME support will still fail when only fcitx is available on the build system.
M Stoeckl
To reproduce:
1. Run any SDL-based program with a Wayland compositor, orphaning it so that it doesn't have an immediate parent process. (For example, from a terminal, running `supertux2 & disown`.) The program should use the wayland backend, i.e. by setting environment variable SDL_VIDEODRIVER=wayland.
2. Kill the compositor process.
Results:
- The SDL program will keep running.
Expected results:
- The SDL program should close. (What close should mean here, I'm not sure - is injecting an SDL_Quit the appropriate action when a video driver disconnects?)
Build data:
2019-06-22, hg tip (12901:bf8d9d29cbf1), Linux, can reproduce with sway, weston, and other Wayland oompositors.
nullcheck the device coming back from InputDevice.getDevice(deviceId) in new code added to sdlactivity.onkey.
java.lang.NullPointerException:
at org.libsdl.app.SDLSurface.onKey (SDLActivity.java:1793)
at android.view.View.dispatchKeyEvent (View.java:13321)
at android.view.ViewGroup.dispatchKeyEvent (ViewGroup.java:1912)
at android.view.ViewGroup.dispatchKeyEvent (ViewGroup.java:1912)
at android.view.ViewGroup.dispatchKeyEvent (ViewGroup.java:1912)
at android.view.ViewGroup.dispatchKeyEvent (ViewGroup.java:1912)
at com.android.internal.policy.DecorView.superDispatchKeyEvent (DecorView.java:685)
at com.android.internal.policy.PhoneWindow.superDispatchKeyEvent (PhoneWindow.java:1869)
at android.app.Activity.dispatchKeyEvent (Activity.java:3447)
at org.libsdl.app.SDLActivity.dispatchKeyEvent (SDLActivity.java:496)
@dang @saml @dave
This is currently supported on Linux and macOS. iOS and Android are not
supported at all, Windows support could be added with some changes to the libusb
backend. The Visual Studio and Xcode projects do not use this feature.
Based on Valve Software's hid.cpp, written in collaboration with Andrew Eikum.
Galadrim
As I have seen, SDL implements its own command line parser for Windows in SDL_windows_main.c. Unfortunately, it doesn't seem to allow command line arguments with trailing backslashes if quoting is required.
Usually, when you write an application that gets command line arguments passed as argc and argv, the parsing is done by parse_cmdline. The Windows API also provides the function CommandLineToArgvW, so an application can parse itself if only the command line string is provided. Both functions behave almost identically according to their documentation. If the argument "\\" (including the quotes) is passed, they both turn it into a single backslash.
The SDL command line parser on the other hand doesn't recognize the second quote character as the closing character in this example and therefore includes it in the parsed argument. The parser does not count the number of backslashes preceding a quote. It always treats a quote as escaped if a backslash is in front of it. Therefore, it should be impossible to quote and escape an argument correctly, if it has a trailing backslash and contains characters that require quoting.
Of course, each application is allowed to implement its own parsing rules, so SDL is free to do so. But the problem I see is that there are arguments, that are impossible to be passed to the parser correctly, as I described above. Is there a reason, why SDL does not simply use CommandLineToArgvW instead of implementing its own parser?
Here are some links that show that correct argument parsing, as it is usually done in Windows, is quite complicated:
https://docs.microsoft.com/en-us/windows/desktop/api/shellapi/nf-shellapi-commandlinetoargvwhttp://www.windowsinspired.com/how-a-windows-programs-splits-its-command-line-into-individual-arguments/
* Added clearer names for RGB pixel formats, e.g. SDL_PIXELFORMAT_XRGB8888, SDL_PIXELFORMAT_XBGR8888, etc.
Windows:
* Added the RAWINPUT controller driver to support more than 4 Xbox controllers simultaneously
* Added the hint SDL_HINT_JOYSTICK_RAWINPUT to control whether the RAWINPUT driver should be used
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_CORRELATE_XINPUT to control whether XInput and WGI should be used to for complete controller functionality with the RAWINPUT driver.
macOS:
* Added the SDL_WINDOW_METAL flag to specify that a window should be created with a Metal view
* Added SDL_Metal_GetLayer() to get the CAMetalLayer backing a Metal view
* Added SDL_Metal_GetDrawableSize() to get the size of a window's drawable, in pixels
Linux:
* Added the hint SDL_HINT_AUDIO_DEVICE_APP_NAME to specify the name that shows up in PulseAudio for your application
* Added the hint SDL_HINT_AUDIO_DEVICE_STREAM_NAME to specify the name that shows up in PulseAudio associated with your audio stream
* Added the hint SDL_HINT_LINUX_JOYSTICK_DEADZONES to control whether HID defined dead zones should be respected on Linux
* Added the hint SDL_HINT_THREAD_PRIORITY_POLICY to specify the thread scheduler policy
* Added the hint SDL_HINT_THREAD_FORCE_REALTIME_TIME_CRITICAL to allow time critical threads to use a realtime scheduling policy
Android:
* Added SDL_AndroidRequestPermission() to request a specific system permission
* Added the hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE_PAUSEAUDIO to control whether audio will pause when the application goes intot he background
OS/2:
* Added support for OS/2, see docs/README-os2.md for details
Emscripten (running in a web browser):
* Added the hint SDL_HINT_EMSCRIPTEN_ASYNCIFY to control whether SDL should call emscripten_sleep internally
* Added SDL_GetTextureScaleMode() and SDL_SetTextureScaleMode() to get and set the scaling mode used for a texture
* Added SDL_LockTextureToSurface(), similar to SDL_LockTexture() but the locked area is exposed as a SDL surface.
* Added new blend mode, SDL_BLENDMODE_MUL, which does a modulate and blend operation
* Added the hint SDL_HINT_DISPLAY_USABLE_BOUNDS to override the results of SDL_GetDisplayUsableBounds() for display index 0.
* Added the window underneath the finger to the SDL_TouchFingerEvent
* Added SDL_GameControllerTypeForIndex(), SDL_GameControllerGetType() to return the type of a game controller (Xbox 360, Xbox One, PS3, PS4, or Nintendo Switch Pro)
* Added the hint SDL_HINT_GAMECONTROLLERTYPE to override the automatic game controller type detection
* Added SDL_JoystickFromPlayerIndex() and SDL_GameControllerFromPlayerIndex() to get the device associated with a player index
* Added SDL_JoystickSetPlayerIndex() and SDL_GameControllerSetPlayerIndex() to set the player index associated with a device
* Added the hint SDL_HINT_GAMECONTROLLER_USE_BUTTON_LABELS to specify whether Nintendo Switch Pro controllers should use the buttons as labeled or swapped to match positional layout. The default is to use the buttons as labeled.
* Added support for Nintendo GameCube controllers to the HIDAPI driver, and a hint SDL_HINT_JOYSTICK_HIDAPI_GAMECUBE to control whether this is used.
* Improved support for Xbox 360 and Xbox One controllers when using the HIDAPI driver
* Added support for many game controllers, including:
* 8BitDo FC30 Pro
* 8BitDo M30 GamePad
* BDA PS4 Fightpad
* HORI Fighting Commander
* Hyperkin Duke
* Hyperkin X91
* MOGA XP5-A Plus
* NACON GC-400ES
* NVIDIA Controller v01.04
* PDP Versus Fighting Pad
* Razer Raion Fightpad for PS4
* Razer Serval
* Stadia Controller
* SteelSeries Stratus Duo
* Victrix Pro Fight Stick for PS4
* Xbox One Elite Series 2
* Fixed blocking game controller rumble calls when using the HIDAPI driver
* Added SDL_zeroa() macro to zero an array of elements
* Added SDL_HasARMSIMD() which returns true if the CPU has ARM SIMD (ARMv6+) features
Windows:
* Fixed crash when using the release SDL DLL with applications built with gcc
* Fixed performance regression in event handling introduced in 2.0.10
* Added support for SDL_SetThreadPriority() for UWP applications
Linux:
* Added the hint SDL_HINT_VIDEO_X11_WINDOW_VISUALID to specify the visual chosen for new X11 windows
* Added the hint SDL_HINT_VIDEO_X11_FORCE_EGL to specify whether X11 should use GLX or EGL by default
iOS / tvOS / macOS:
* Added SDL_Metal_CreateView() and SDL_Metal_DestroyView() to create CAMetalLayer-backed NSView/UIView and attach it to the specified window.
iOS/ tvOS:
* Added support for Bluetooth Steam Controllers as game controllers
tvOS:
* Fixed support for surround sound on Apple TV
Android:
* Added SDL_GetAndroidSDKVersion() to return the API level of the current device
* Added support for audio capture using OpenSL-ES
* Added support for Bluetooth Steam Controllers as game controllers
* Fixed rare crashes when the app goes into the background or terminates
@@ -82,6 +82,23 @@ For more complex projects, follow these instructions:
4b. If you want to build manually, run './gradlew installDebug' in the project directory. This compiles the .java, creates an .apk with the native code embedded, and installs it on any connected Android device
If you already have a project that uses CMake, the instructions change somewhat:
1. Do points 1 and 2 from the instruction above.
2. Edit "<project>/app/build.gradle" to comment out or remove sections containing ndk-build
and uncomment the cmake sections. Add arguments to the CMake invocation as needed.
3. Edit "<project>/app/jni/CMakeLists.txt" to include your project (it defaults to
adding the "src" subdirectory). Note that you'll have SDL2, SDL2main and SDL2-static
as targets in your project, so you should have "target_link_libraries(yourgame SDL2 SDL2main)"
in your CMakeLists.txt file. Also be aware that you should use add_library() instead of
add_executable() for the target containing your "main" function.
If you wish to use Android Studio, you can skip the last step.
4. Run './gradlew installDebug' or './gradlew installRelease' in the project directory. It will build and install your .apk on any
connected Android device
Here's an explanation of the files in the Android project, so you can customize them:
android-project/app
@@ -90,10 +107,12 @@ Here's an explanation of the files in the Android project, so you can customize
jni/ - directory holding native code
jni/Application.mk - Application JNI settings, including target platform and STL library
jni/Android.mk - Android makefile that can call recursively the Android.mk files in all subdirectories
jni/CMakeLists.txt - Top-level CMake project that adds SDL as a subproject
jni/SDL/ - (symlink to) directory holding the SDL library files
jni/SDL/Android.mk - Android makefile for creating the SDL shared library
jni/src/ - directory holding your C/C++ source
jni/src/Android.mk - Android makefile that you should customize to include your source code and any library references
jni/src/CMakeLists.txt - CMake file that you may customize to include your source code and any library references
src/main/assets/ - directory holding asset files for your application
src/main/res/ - directory holding resources for your application
src/main/res/mipmap-* - directories holding icons for different phone hardware
This is disabled by default since it seems to break the terms of the iOS SDK agreement for iOS versions prior to iOS 8. It can be re-enabled in SDL_config_iphoneos.h.
Loaded 100 of 1048 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Sam Lantinga
